Benefits:
High Grade Components
The tolerance components in the signal paths are paid special consideration
to improve
the small signal specifications. The output and power supply devices in the
Orion Cobalt 8001
Amplifier is rated at 10% - 20% higher than are required for the amplifiers
power output.
This is to ensure that the amplifier will deliver consistant power in
extreme conditions.
As components increase in temperature their value reduces, this is called
de-rating.
This can be detrimental to the components over a period of time.
High Efficiency Aluminum Heatsinks
The Orion Cobalt 6004 Amplifier heatsink is extruded from high-grade 6061
automotive grade aluminum.
The design of the heatsink has been optimized to pull heat away from the
devices as efficiently
as possible and dissipates the heat evenly across the entire heatsink area.
Fully Adjustable Controls
The front of the Orion Cobalt 6004 Amplifier is designed to be
extremely flexible to allow virtually
any system set-up and/or upgrade. With fully variable x-overs, audio line
out, and remote bass control
the amplifier will hit hard no matter what the set-up is or what vehicle its
in.
High Level Inputs With Auto-Sense Turn On
To aid in the installation, the amplifier has been equipped with high-level
inputs,
such as the Auto-Sense circuit. When more than 1V is detected on the speaker
line,
the amplifier will turn on. Once the voltage is gone for more than 30
seconds, the amplifier will turn off.
Features:
Small proprietary design with illuminated detail
High level inputs with auto turn on circuits
Flexible frontends to accommodate a variety of system configurations
Excellent small signal parameters
Specifications:
600 Watts peak
4 Channel with crossover
4 x 60 @ 4ohm
4 x 75 @ 2ohm