Dakota Alert Wireless Indoor Motion Sensor Alert System comes with the IR-3000 and the WR-3000.
The IR-3000 is the newest wireless PIR indoor motion sensor from Dakota Alert. With a wireless range of up to 600 feet* and full compatibility with any Dakota Alert 3000 Series transmitters or receivers, the IR-3000 will allow you to monitor many indoor locations that were difficult before.
The passive infrared detector is able to monitor an area up
to 100º wide. With the integral mask, the detection area can
be narrowed down to 20º or anywhere in between. With the
swivel mount, the IR-3000 sensor can be adjusted right to left up to 80º and up and down up to 50º. With three different sensitivity settings, the IR-3000 can detect a person up to 12 feet, 25 feet or 40 feet away.
The sensor can also be set to flash an LED or stay dark when a signal is sent. The IR-3000 is powered by one 9 volt battery and will have a battery life of about 12 months under normal conditions. There is also a low battery alert to notify you when it is time to replace the battery. The IR-3000 is designed for indoor or light duty outdoor applications under an eave or awning or other protected location.
Operating range -30º F to 120º F.
The WR-3000 is the receiver for All 3000 Series systems. The WR-3000 plugs into a standard wall outlet and can be placed on a table or mounted on the wall. When the receiver gets a signal from the transmitter, one of four diff erent tones (Classical, Westminster Chime, Ding Dong, or Whistle) will sound for a few seconds. There is also a volume control, allowing you to set the sound to the desired level. The WR-3000 is equipped with four form “C” relays (one for each zone), and one 12-volt DC output terminal that will activate for several seconds when a signal is received. The receiver can be user-programmed, so the 12-volt DC terminal and one relay will activate for 10 minutes, if this is desired. The tones will still sound for several seconds.
Great for home security, retail and business!