Clean Park Gray Standard Garage Mats
The Park Smart Clean Park Garage Mat catches every drop of mud, slush and grime that falls off of your vehicle, keeping your garage floor clean and eliminating the problem of tracking filth into your home. The Clean Park Garage Mat also keeps your garage and home safe by keeping all of your walk areas dry. The heavy-duty 20-mil vinyl, in conjunction with the raised plastic edges, holds gallons of liquid from spreading onto the garage floor. The specially engineered Snap-On edges are extremely durable, as well as fast and easy to install, without tools. All sizes of the Park Smart Clean Park come complete with 24" long Snap-On side pieces and 18" long Snap-On end pieces.
Catches every drop of mud, slush
and grime that falls off of your vehicle.
garage floor clean eliminating
the problem of tracking mud and grime
into your home.
Keeps your garage and home safe
by preventing slips and falls.
The specially engineered Snap-On edges
are extremely durable and easy to install,
Some assembly required
one or more of the end pieces
closest to the garage door
Be careful not to puncture or cut the vinyl
sheeting with the edge of the top piece
as you pull it off
the Clean Park® with
a soft bristle broom
Hose off the Clean Park®
Use a soft bristle broom to push water
towards the open area, off of the
Only a mild dish soap may be used
on the Clean Park®
Do Not Use Solvents, Harsh Chemicals,
Abrasive Cleaners or Bleach
Warning: Rocks and other sharp objects may puncture the Clean Park®. To avoid punctures, regularly remove debris by sweeping with a soft bristle broom. Discoloration of the vinyl sheeting may occur over time and does not affect the integrity of the material. Tire imprints due to the weight of your vehicle on the vinyl sheeting may occur and will not affect your Clean Park®
SHIPPING: This item can be shipped within the continental United States only 2nd day shipping not available with this item
NOTE: All Clean Parks can be shortened by 2’ increments, just omit some of the
V-Shaped pieces and cut the vinyl sheet as described in Step 2.
or vacuum garage floor. Repair or
cover (with duct tape) any cracks in garage floor.
Attach long V-Shaped
pieces to left and right sides. Start
at the edge closest to the street. See figure 1.
On the end farthest away from the
street, cut down vinyl sheet so it protrudes 1½”
inches beyond the last long
V-Shaped side piece. See figure 2.
On the side farthest away from
the street, attach the short V-Shaped pieces.
See figure 3.
Lay flat parts with tube on the
floor, under the edge of the vinyl. Left
and right flat parts should rest on top
of the flat area of the left and right long V-Shaped side pieces. See figure 4.
Snap arched parts down, over
vinyl sheet, onto flat parts with tube.
Important: Each kit includes
two arched parts with one rounded corner. The rounded corner goes on top of the vinyl,
next to the long V-Shaped piece, located at figures 5 & 6.
|Small||7.5' x 14'||$149.95|
|Medium||7.5' x 16'||$159.95|
|Standard||7.5' x 18'||$179.95|
|Large||7.5' x 20'||$189.95|
|Larger||7.5' x 22'||$199.95|
|X-Large||9' x 20'||$211.95|
|XX-Large||9' x 22'||$222.95|