Michelin Smart Jumper Cables

The Michelin Smart Jumper Cables are a safer and easier to use than the ordinary jumper cables. They require no guesswork, a green LED indicator light confirms that the connection is correct. There is no sparking or shorting when you attach the clamps, the polarity adjusts automatically. A built-in surge protector prevents damage to your vehicle computer or electronics.

Features:

• Automatically adjusts polarity

• Built-in surge protector

• LED indicator lights

• Textured grips

• 12 ft. length, 8 gauge cable

• Cables stay flexible and tangle free in cold weather

4 Easy Steps:

• Step 1 - With the ignition of both vehicles in the off position,
  connect one set of clamps to the assisting vehicle battery,
  one clamp to each battery terminal-polarity doesn't matter.

• Step 2 - Connect the other set of clamps to the disabled vehicle battery,
  the first clamp to the positive battery terminal and the second clamp
  to metal on the vehicle engine block/frame.

• Step 3 - Both green indicator lights should illuminate on the center module.
  If not, adjusts the clamp until they do.

• Step 4 - Start the assisting vehicle and allow to idle for about 30 seconds.
  Start the disabled vehicle. When it is running, disconnect the clamp from
  the engine block/frame, then disconnect the remaining clamps in any order.