Wheel Balancer With Laser Guided Operation

Built with your productivity and profitability in mind, the Coats 1250 is an extremely fast, exceptionally accurate LED balancer designed for front line, high volume shop duty. Why? Because it saves you time everywhere you turn. From the Laser Guided Operation, to the dual operators, to our integrated behind the spoke capability, now it is easier than ever to handle all your balancing needs.

• Control Panel - LED display operators provide
needed information for all 8 balancing modes.
Simultaneous display of static and dynamic data
identifies excess residual static imbalance. Easy to read position indicators. Integrated VFD display provides the operator step-by-step
instruction through the balancing process.
• Laser Guided Operation - Eliminates error by displaying exact Tape-A-Weight placement
and behind the spoke weight placement locations.
• Auto Data Entry - Automatic offset and diameter
measurement with manual control backups.
• Auto Start Hood - Five second (avg) balancing
cycle begins when you lower the hood.
• 8 Balancing Modes - Static, dynamic, four alloy
options, behind the spoke (on all modes with inside weight), plus patch balance.
• Removeable Shaft - Can be ordered in 28mm
or 40mm configurations.
• 1.5 HP Direct Drive Motor - No belts to slip or pulleys to wear out.
• Weight Storage System - Weight bin is laid out logically so the weights you use most are right at your fingertips.
• Balancing Modes: 8
• Wheel Diameter Range: 8” to 30”
• Wheel Width Range: 2” to 20”
• Maximum Tire Diameter: Up to 44”
• Maximum Tire Weight: 160 lbs.
• Shaft Diameter: 28mm/40mm
• Resolution (Round Off Mode): 0.25oz, position .70
• Power Requirement: 220v AC, 1 Ph, 60 Hz (121250). NOTE: 220/440V 3 phase models also available.
• Footprint: 57” w x 50” d
• Shipping Weight: 680 lbs.

This balancer must be ordered with an adapter kit (not included with balancer. Basic Kit,
Extended Kit, and Premium Kits are available in 28mm and 40mm spindle sizes. See part numbers COA 8114335, COA 8114337, COA, 8114338, COA 8114339, COA 8114341, COA 8114342 for adapter kits.
By Coats.