1950 Chevrolet Bel Air Brake Job Parts
Compare pads, rotors, and kits listed for your 1950 Chevrolet Bel Air. Check front or rear position, pad material, included hardware, and trim fitment before ordering.
Brake Kits
(8)primary
Wilwood
Part # 140-11811
Wilwood Forged Dynalite Front Kit 11.00in 49-54 Chevy / 53-62 Corvette
- Position
- Front
$1130.37
Wilwood
Part # 140-11811-DR
Wilwood Forged Dynalite Front Kit 11.00in Drill-Red 49-54 Chevy / 53-62 Corvette
- Position
- Front
$1272.93
Wilwood
Part # 140-11811-D
Wilwood Forged Dynalite Front Kit 11.00in Drilled 49-54 Chevy / 53-62 Corvette
- Position
- Front
- Rotor
- Drilled
$1272.93
Wilwood
Part # 140-11811-R
Wilwood Forged Dynalite Front Kit 11.00in Red 49-54 Chevy / 53-62 Corvette
- Position
- Front
$1130.37
Wilwood
Part # 140-11812
Wilwood Forged Dynalite Front Kit 12.19in 49-54 Chevy/53-62 Corvette (*Line Kit Needed*)
- Position
- Front
$1167.80
Wilwood
Part # 140-11812-D
Wilwood Forged Dynalite Front Kit 12.19in Drilled 49-54 Chevy/53-62 Corvette (*Line Kit Needed*)
- Position
- Front
- Rotor
- Drilled
$1310.36
Wilwood
Part # 140-11812-DR
Wilwood Forged Dynalite Front Kit 12.19in Drilled Red 49-54 Chevy/53-62 Corvette (*Line Kit Needed*)
- Position
- Front
- Rotor
- Drilled
$1310.36
Wilwood
Part # 140-11812-R
Wilwood Forged Dynalite Front Kit 12.19in Red 49-54 Chevy/53-62 Corvette (*Line Kit Needed*)
- Position
- Front
$1167.80
Brake Fluid
(9)consumable
Gates
Part # 31066
Engine Oil Filler Cap
$4.01
Four Seasons
Part # 53020
Oil Cooler Coupling
$9.32
Hayden
Part # 105
Oil Cooler Replacement Hose
$11.61
Four Seasons
Part # 53015
Oil Cooler Replacement Hose
$19.64
Dorman
Part # 090-052
Oil Drain Plug Pilot Point 1/2-20, Head Size 9/16 In.
$14.76
Dorman
Part # 090-052CD
Oil Drain Plug Pilot Point 1/2-20, Head Size 9/16 In.
$6.36
Dorman
Part # 65147
Oil Drain Plug Pilot Point 1/2-20, Head Size 9/16 In.
$7.83
Dorman
Part # 65202
Oil Drain Plug Pilot Point 1/2-20, Head Size 9/16 In.
$6.75
Brake Job Checklist for Your 1950 Chevrolet Bel Air
Choose the axle first. Front and rear brake parts are usually different.
Compare pad material for your driving style, then inspect rotor wear before ordering.
Use a pad-and-rotor kit when both wear items are due on the same axle.
Brake Job for Other Chevrolet Bel Air Years
Other Jobs for Your 1950 Chevrolet Bel Air
Frequently Asked Questions
What parts do I need for a brake job on my 1950 Chevrolet Bel Air?
A complete brake job on the 1950 Chevrolet Bel Air usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.
Should I replace brake pads and rotors together on my 1950 Chevrolet Bel Air?
If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.
Ceramic or semi-metallic brake pads: which should I choose?
Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.
Do I need front or rear brake pads for my 1950 Chevrolet Bel Air?
Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.
How long does a brake job take on a 1950 Chevrolet Bel Air?
A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.
Can I do a brake job myself?
A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.
Are these parts guaranteed to fit my 1950 Chevrolet Bel Air?
These parts are listed for the 1950 Chevrolet Bel Air using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.
What brands make brake job parts for the 1950 Chevrolet Bel Air?
We carry brake job parts from trusted brands including Wilwood, Gates, Four Seasons, Hayden, and Dorman. Filter by brand to find your preferred manufacturer.
How much does a brake job cost for a 1950 Chevrolet Bel Air?
The cost of a brake job for the 1950 Chevrolet Bel Air depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.