Question 1

What parts do I need for a brake job on my 1963 Chevrolet Corvette?

Accepted Answer

A complete brake job on the 1963 Chevrolet Corvette usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.

Question 2

Should I replace brake pads and rotors together on my 1963 Chevrolet Corvette?

Accepted Answer

If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.

Question 3

Ceramic or semi-metallic brake pads: which should I choose?

Accepted Answer

Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.

Question 4

Do I need front or rear brake pads for my 1963 Chevrolet Corvette?

Accepted Answer

Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.

Question 5

How long does a brake job take on a 1963 Chevrolet Corvette?

Accepted Answer

A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.

Question 6

Can I do a brake job myself?

Accepted Answer

A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.

Question 7

Are these parts guaranteed to fit my 1963 Chevrolet Corvette?

Accepted Answer

These parts are listed for the 1963 Chevrolet Corvette using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.

Question 8

What brands make brake job parts for the 1963 Chevrolet Corvette?

Accepted Answer

We carry brake job parts from trusted brands including Dynamic Friction, DFC, Bendix, Centric Parts, and ATP. Filter by brand to find your preferred manufacturer.

Question 9

How much does a brake job cost for a 1963 Chevrolet Corvette?

Accepted Answer

The cost of a brake job for the 1963 Chevrolet Corvette depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.

1963 Chevrolet Corvette Brake Job Parts

Brake Pads

DFC 4000 HybriDynamic Brake Pads

DFC 63-82 Chevrolet Camaro Front/Rear 4000 HybriDynamic Brake Pads and Hardware Kit

DFC 63-82 Chevrolet Camaro Front/Rear 5000 Advanced Semi Metallic Brake Pads

DFC 63-82 Chevrolet Corvette Front/Rear Heavy Duty Pads - Semi Metallic

DFC 63-82 Chevrolet Corvette Front/Rear Heavy Duty Pads and Hardware Kit

DFC 63-82 Chevrolet Corvette Rear/Front 5000 Advanced Semi Metallic Brake Pads and Hardware Kit

DFC Brake Rotor - Drilled & Slotted - Black- HD Brake Pad

DFC Brake Rotor - Drilled & Slotted - Black- HD Brake Pad - Hardware

Brake Rotors

BENDIX Brake Drum

C-Tek Standard Brake Drum

C-Tek Standard Brake Rotor

Centric GCX Rotor with Full Coating

Centric Premium Brake Drum

DFC 63-82 Chevrolet Camaro Rear Left/Front Left Drilled & Slotted Geoperformance Rotor

DFC 63-82 Chevrolet Camaro Rear Right/Front Right Drilled & Slotted Geoperformance Rotor

DFC 63-82 Chevrolet Camaro Rear Right/Front Right Drilled & Slotted Silver Brake Rotor

Brake Fluid

ATP Automatic Transmission Oil Pump Seal

Bosch Oil Filter

Bosch Oil Filter

Engine Oil Pressure Switch

Engine Oil Pump

Engine Oil Pump

Engine Oil Pump Intermediate Shaft