1980 Chevrolet Impala Brake Job Parts
Compare pads, rotors, and kits listed for your 1980 Chevrolet Impala. Check front or rear position, pad material, included hardware, and trim fitment before ordering.
Brake Pads
(66)primary
Bendix
Part # MKD52FM
BENDIX Fleet MetLok Brake Pad
$40.20
Bosch
Part # BE52H
Bosch Brake Pads
$21.40
Bosch
Part # BP52S
Bosch QuietCast Brake Pads
$35.25
Bosch
Part # BC52S
Bosch QuietCast Brake Pads
$34.83
Bosch
Part # BSD52S
Bosch Severe duty
$37.25
Centric Parts
Part # 301.00520
Centric Premium Ceramic Brake Pads with Shims and Hardware
- Pad
- Ceramic
- Hardware
- Included
$33.11
Dynamic Friction
Part # 4000-0052-00
DFC 4000 HybriDynamic Brake Pads
$38.05
DFC
Part # 4000-0052-01
DFC 67-02 Buick GS 400 Front 4000 HybriDynamic Brake Pads and Hardware Kit
- Position
- Front
- Hardware
- Included
$41.02
Brake Rotors
(59)primary
PowerStop
Part # AD8214P
AutoSpecialty High Temp Coated Brake Drum
- Finish
- Coated
$81.70
Bendix
Part # PDR0199
BENDIX Brake Drum
$95.65
Bendix
Part # PDR0454
BENDIX Brake Drum
$79.90
Bendix
Part # PDR0201
BENDIX Brake Drum
$129.66
Bendix
Part # PRT1216
BENDIX Disc Brake Rotor and Hub Assembly
$91.64
Centric Parts
Part # 123.62018
C-Tek Standard Brake Drum
$79.88
Centric Parts
Part # 121.62008
C-Tek Standard Brake Rotor
$63.18
Centric Parts
Part # 121.62012
C-Tek Standard Brake Rotor
$65.59
Brake Kits
(42)primary
PowerStop
Part # SC2908
Power Stop 1979 Pontiac Phoenix Front Semi-Coated Rotor Kit
- Position
- Front
- Finish
- Coated
$217.34
PowerStop
Part # KOE2908
Power Stop 1985 Buick Electra Front Autospecialty Brake Kit
- Position
- Front
$230.25
PowerStop
Part # KCOE2908
Power Stop 1985 Buick Electra Front Autospecialty Brake Kit w/Calipers
- Position
- Front
$367.64
PowerStop
Part # K2908
Power Stop 1985 Buick Electra Front Z23 Evolution Sport Brake Kit
- Position
- Front
$346.56
PowerStop
Part # K2908-26
Power Stop 1985 Buick Electra Front Z26 Street Warrior Brake Kit
- Position
- Front
$399.85
PowerStop
Part # KC2908-26
Power Stop 79-86 Buick LeSabre Front Z26 Street Warrior Brake Kit w/Calipers
- Position
- Front
$588.90
PowerStop
Part # K4535
Power Stop 85-89 Buick Electra Front Z23 Evolution Sport Brake Kit
- Position
- Front
$292.71
PowerStop
Part # K4535-26
Power Stop 85-89 Buick Electra Front Z26 Street Warrior Brake Kit
- Position
- Front
$341.62
Brake Fluid
(99)consumable
aFe
Part # 44-LF010-MB
aFe Pro GUARD D2 Oil Filter 00-14 GM Gas Trucks V6 4.3L (4 Pack)
$72.93
aFe
Part # 44-LF009-MB
aFe Pro GUARD D2 Oil Filter 03-06 GM Trucks V8 4.8L/5.3L/6.0L (4 Pack)
$72.93
aFe
Part # 44-LF011-MB
aFe Pro GUARD D2 Oil Filter 99-05 GM Gas Trucks V8 4.8L/5.3L/6.0L (4 Pack)
$72.93
aFe
Part # 44-LF010
aFe ProGuard D2 Fluid Filters Oil F/F OIL GM Cars & Trucks 75-10 L4/V6
$29.18
aFe
Part # 44-LF009
aFe ProGuard D2 Fluid Filters Oil F/F OIL GM Trucks 03-06 V8-4.8L/5.3L/6.0L
$16.38
aFe
Part # 44-LF011
aFe ProGuard D2 Fluid Filters Oil F/F OIL GM Trucks 99-05 V8-4.8L/5.3L/6.0L
$29.18
ATP
Part # SO-35
ATP Automatic Transmission Dipstick Tube Seal
$5.17
ATP
Part # CO-37
ATP Automatic Transmission Oil Pump Seal
$14.18
Brake Job Checklist for Your 1980 Chevrolet Impala
Choose the axle first. Front and rear brake parts are usually different.
Compare pad material for your driving style, then inspect rotor wear before ordering.
Use a pad-and-rotor kit when both wear items are due on the same axle.
Brake Job for Other Chevrolet Impala Years
Other Jobs for Your 1980 Chevrolet Impala
Frequently Asked Questions
What parts do I need for a brake job on my 1980 Chevrolet Impala?
A complete brake job on the 1980 Chevrolet Impala usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.
Should I replace brake pads and rotors together on my 1980 Chevrolet Impala?
If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.
Ceramic or semi-metallic brake pads: which should I choose?
Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.
Do I need front or rear brake pads for my 1980 Chevrolet Impala?
Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.
How long does a brake job take on a 1980 Chevrolet Impala?
A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.
Can I do a brake job myself?
A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.
Are these parts guaranteed to fit my 1980 Chevrolet Impala?
These parts are listed for the 1980 Chevrolet Impala using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.
What brands make brake job parts for the 1980 Chevrolet Impala?
We carry brake job parts from trusted brands including Bendix, Bosch, Centric Parts, Dynamic Friction, and DFC. Filter by brand to find your preferred manufacturer.
How much does a brake job cost for a 1980 Chevrolet Impala?
The cost of a brake job for the 1980 Chevrolet Impala depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.