1968 Chevrolet P10 Van Brake Job Parts
Compare pads, rotors, and kits listed for your 1968 Chevrolet P10 Van. Check front or rear position, pad material, included hardware, and trim fitment before ordering.
Brake Rotors
(4)primary
Brake Fluid
(39)consumable
ATP
Part # CO-4
ATP Automatic Transmission Oil Pump Seal
$9.74
Hayden
Part # 293
Engine Oil Cooler Metal Line Kit
$48.14
Hayden
Part # 112
Engine Oil Cooler Replacement Hose
$36.40
Hayden
Part # 214
Engine Oil Filter Remote Mount Kit
$55.94
Standard Motor Products
Part # PS-12
Engine Oil Pressure Switch
$12.85
Rostra
Part # 50-1218
Engine Oil Pressure Switch
$18.73
Sealed Power
Part # 224-4157
Engine Oil Pump
$110.91
Sealed Power
Part # 224-4147
Engine Oil Pump
$51.15
Brake Job Checklist for Your 1968 Chevrolet P10 Van
Choose the axle first. Front and rear brake parts are usually different.
Compare pad material for your driving style, then inspect rotor wear before ordering.
Use a pad-and-rotor kit when both wear items are due on the same axle.
Brake Job for Other Chevrolet P10 Van Years
Other Jobs for Your 1968 Chevrolet P10 Van
Frequently Asked Questions
What parts do I need for a brake job on my 1968 Chevrolet P10 Van?
A complete brake job on the 1968 Chevrolet P10 Van usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.
Should I replace brake pads and rotors together on my 1968 Chevrolet P10 Van?
If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.
Ceramic or semi-metallic brake pads: which should I choose?
Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.
Do I need front or rear brake pads for my 1968 Chevrolet P10 Van?
Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.
How long does a brake job take on a 1968 Chevrolet P10 Van?
A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.
Can I do a brake job myself?
A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.
Are these parts guaranteed to fit my 1968 Chevrolet P10 Van?
These parts are listed for the 1968 Chevrolet P10 Van using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.
What brands make brake job parts for the 1968 Chevrolet P10 Van?
We carry brake job parts from trusted brands including Bendix, Centric Parts, Raybestos, ATP, and Hayden. Filter by brand to find your preferred manufacturer.
How much does a brake job cost for a 1968 Chevrolet P10 Van?
The cost of a brake job for the 1968 Chevrolet P10 Van depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.