Question 1

What parts do I need for a brake job on my 1987 Chrysler Conquest?

Accepted Answer

A complete brake job on the 1987 Chrysler Conquest usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.

Question 2

Should I replace brake pads and rotors together on my 1987 Chrysler Conquest?

Accepted Answer

If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.

Question 3

Ceramic or semi-metallic brake pads: which should I choose?

Accepted Answer

Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.

Question 4

Do I need front or rear brake pads for my 1987 Chrysler Conquest?

Accepted Answer

Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.

Question 5

How long does a brake job take on a 1987 Chrysler Conquest?

Accepted Answer

A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.

Question 6

Can I do a brake job myself?

Accepted Answer

A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.

Question 7

Are these parts guaranteed to fit my 1987 Chrysler Conquest?

Accepted Answer

These parts are listed for the 1987 Chrysler Conquest using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.

Question 8

What brands make brake job parts for the 1987 Chrysler Conquest?

Accepted Answer

We carry brake job parts from trusted brands including Bendix, Bosch, Centric Parts, DFC, and Dynamic Friction. Filter by brand to find your preferred manufacturer.

Question 9

How much does a brake job cost for a 1987 Chrysler Conquest?

Accepted Answer

The cost of a brake job for the 1987 Chrysler Conquest depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.

1987 Chrysler Conquest Brake Job Parts

Brake Pads

BENDIX Fleet MetLok Brake Pad

Bosch Brake Pads

Bosch QuietCast Brake Pads

Bosch QuietCast Brake Pads

C-Tek Ceramic Brake Pads with Shims

C-Tek Semi-Metallic Brake Pads with Shims

Centric Premium Ceramic Brake Pads with Shims and Hardware

Centric Premium Semi-Metallic Brake Pads with Shims and Hardware

Brake Rotors

C-Tek Standard Brake Rotor

C-Tek Standard Brake Rotor

DFC 83-89 Chrysler Conquest Front Brake Rotor

DFC 83-89 Chrysler Conquest Front Left Drilled & Slotted Silver Brake Rotor

DFC 83-89 Chrysler Conquest Front Right Drilled & Slotted Silver Brake Rotor

DFC 83-89 Chrysler Conquest Rear Brake Rotor

DFC Brake Rotors - Blank

R1 83-89 Chrysler Conquest Front Left Drilled & Slotted Black Brake Rotor

Brake Fluid

Bosch Oil Filter

Engine Oil Cooler Metal Line Kit

Engine Oil Cooler Replacement Hose

gpd Engine Oil Pressure Switch

High Performance Transmission Oil Cooler

High Performance Transmission Oil Cooler

Holstein Parts 2OPS0037 Engine Oil Pressure Switch

Oil Cooler Coupling

Brake Job Checklist for Your 1987 Chrysler Conquest

Brake Job for Other Chrysler Conquest Years

Other Jobs for Your 1987 Chrysler Conquest

Frequently Asked Questions