1995 Ford Crown Victoria Brake Job Parts
Compare pads, rotors, and kits listed for your 1995 Ford Crown Victoria. Check front or rear position, pad material, included hardware, and trim fitment before ordering.
Brake Pads
(73)primary
Bendix
Part # MKD659FM
BENDIX Fleet MetLok Brake Pad
$43.36
Bosch
Part # BE659H
Bosch Brake Pads
$47.07
Bosch
Part # BP659
Bosch QuietCast Brake Pads
$39.10
Bosch
Part # BSD659
Bosch Severe duty
$33.25
Centric Parts
Part # 103.06620
C-Tek Ceramic Brake Pads with Shims
- Pad
- Ceramic
$25.39
Centric Parts
Part # 103.06780
C-Tek Ceramic Brake Pads with Shims
- Pad
- Ceramic
$24.71
Centric Parts
Part # 102.06620
C-Tek Semi-Metallic Brake Pads with Shims
- Pad
- Semi-metallic
$19.53
Centric Parts
Part # 102.06780
C-Tek Semi-Metallic Brake Pads with Shims
- Pad
- Semi-metallic
$23.97
Brake Rotors
(45)primary
Bendix
Part # PRT5048
BENDIX Disc Brake Rotor
$61.18
Bendix
Part # PRT1547
BENDIX Disc Brake Rotor
$47.21
Bosch
Part # 20010345
Bosch QuietCast Disc Brake Rotor
$77.66
Centric Parts
Part # 121.61047
C-Tek Standard Brake Rotor
$46.60
Centric Parts
Part # 121.61032
C-Tek Standard Brake Rotor
$35.40
Centric Parts
Part # 320.61047F
Centric GCX Rotor with Full Coating
$64.47
Centric Parts
Part # 320.61032F
Centric GCX Rotor with Full Coating
$41.54
Centric Parts
Part # 120.61047
Centric Premium Brake Rotor
$50.06
Brake Kits
(5)primary
PowerStop
Part # KOE4994
Power Stop 92-95 Ford Crown Victoria Rear Autospecialty Brake Kit
- Position
- Rear
$125.44
PowerStop
Part # KOE2917
Power Stop 95-97 Ford Crown Victoria Front Autospecialty Brake Kit
- Position
- Front
$173.13
PowerStop
Part # CRK2917
Power Stop 95-97 Ford Crown Victoria Front Z17 Evolution Geomet Coated Brake Kit
- Position
- Front
- Finish
- Coated
$206.45
PowerStop
Part # K2917
Power Stop 95-97 Ford Crown Victoria Front Z23 Evolution Sport Brake Kit
- Position
- Front
$265.37
PowerStop
Part # KOE6256
Power Stop 1995 Ford Crown Victoria Front & Rear Autospecialty Brake Kit
- Position
- Front/Rear
$298.57
Brake Fluid
(63)consumable
aFe
Part # 44-LF008-MB
aFe Pro GUARD D2 Oil Filter 93-11 Ford Gas Trucks V8 4.6L/5.4L/5.8L (4 Pack)
$60.13
aFe
Part # 44-LF008
aFe ProGuard D2 Fluid Filters Oil F/F OIL Ford Trucks 93-11 V8-4.6L/5.4L/5.8L
$29.18
ATP
Part # LO-29
ATP Automatic Transmission Oil Pump Seal
$18.20
Bosch
Part # 72227WS
Bosch Oil Filter
$4.92
Bosch
Part # 3410
Bosch Oil Filter
$6.32
Baldwin Filters
Part # SA2085
Crankcase Breather Filter in Plastic Housing
$3.61
Hayden
Part # 293
Engine Oil Cooler Metal Line Kit
$48.06
Hayden
Part # 112
Engine Oil Cooler Replacement Hose
$36.34
Brake Job Checklist for Your 1995 Ford Crown Victoria
Choose the axle first. Front and rear brake parts are usually different.
Compare pad material for your driving style, then inspect rotor wear before ordering.
Use a pad-and-rotor kit when both wear items are due on the same axle.
Brake Job for Other Ford Crown Victoria Years
Other Jobs for Your 1995 Ford Crown Victoria
Frequently Asked Questions
What parts do I need for a brake job on my 1995 Ford Crown Victoria?
A complete brake job on the 1995 Ford Crown Victoria usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.
Should I replace brake pads and rotors together on my 1995 Ford Crown Victoria?
If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.
Ceramic or semi-metallic brake pads: which should I choose?
Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.
Do I need front or rear brake pads for my 1995 Ford Crown Victoria?
Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.
How long does a brake job take on a 1995 Ford Crown Victoria?
A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.
Can I do a brake job myself?
A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.
Are these parts guaranteed to fit my 1995 Ford Crown Victoria?
These parts are listed for the 1995 Ford Crown Victoria using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.
What brands make brake job parts for the 1995 Ford Crown Victoria?
We carry brake job parts from trusted brands including Bendix, Bosch, Centric Parts, PowerStop, and aFe. Filter by brand to find your preferred manufacturer.
How much does a brake job cost for a 1995 Ford Crown Victoria?
The cost of a brake job for the 1995 Ford Crown Victoria depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.