1966 Ford Falcon Brake Job Parts
Compare pads, rotors, and kits listed for your 1966 Ford Falcon. Check front or rear position, pad material, included hardware, and trim fitment before ordering.
Brake Pads
(4)primary
Brake Rotors
(8)primary
Bendix
BENDIX Brake Drum
$63.69
Bendix
BENDIX Brake Drum
$78.22
Centric Parts
C-Tek Standard Brake Drum
$44.36
Centric Parts
C-Tek Standard Brake Drum
$62.26
Centric Parts
C-Tek Standard Brake Drum
$53.76
Centric Parts
Centric Premium Brake Drum
$53.24
Centric Parts
Centric Premium Brake Drum
$74.96
Raybestos
Raybestos R-Line Brake Drum
$57.26
Brake Fluid
(36)consumable
ATP
ATP Automatic Transmission Oil Pump Seal
$6.99
Bosch
Bosch Oil Filter
$9.77
EcoGard
BULK OIL FILTERS
$4.27
Hayden
Engine Oil Cooler Metal Line Kit
$48.14
Hayden
Engine Oil Cooler Replacement Hose
$36.40
Rostra
Engine Oil Pressure Switch
$4.71
Sealed Power
Engine Oil Pump
$94.05
Sealed Power
Engine Oil Pump
$52.11
Brake Job Checklist for Your 1966 Ford Falcon
Choose the axle first. Front and rear brake parts are usually different.
Compare pad material for your driving style, then inspect rotor wear before ordering.
Use a pad-and-rotor kit when both wear items are due on the same axle.
Brake Job for Other Ford Falcon Years
Other Jobs for Your 1966 Ford Falcon
Frequently Asked Questions
What parts do I need for a brake job on my 1966 Ford Falcon?
A complete brake job on the 1966 Ford Falcon usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.
Should I replace brake pads and rotors together on my 1966 Ford Falcon?
If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.
Ceramic or semi-metallic brake pads: which should I choose?
Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.
Do I need front or rear brake pads for my 1966 Ford Falcon?
Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.
How long does a brake job take on a 1966 Ford Falcon?
A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.
Can I do a brake job myself?
A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.
Are these parts guaranteed to fit my 1966 Ford Falcon?
These parts are listed for the 1966 Ford Falcon using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.
What brands make brake job parts for the 1966 Ford Falcon?
We carry brake job parts from trusted brands including Centric Parts, MPA, Bendix, Raybestos, and ATP. Filter by brand to find your preferred manufacturer.
How much does a brake job cost for a 1966 Ford Falcon?
The cost of a brake job for the 1966 Ford Falcon depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.