Question 1

What parts do I need for a brake job on my 2003 Ford Grand Marquis?

Accepted Answer

A complete brake job on the 2003 Ford Grand Marquis usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.

Question 2

Should I replace brake pads and rotors together on my 2003 Ford Grand Marquis?

Accepted Answer

If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.

Question 3

Ceramic or semi-metallic brake pads: which should I choose?

Accepted Answer

Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.

Question 4

Do I need front or rear brake pads for my 2003 Ford Grand Marquis?

Accepted Answer

Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.

Question 5

How long does a brake job take on a 2003 Ford Grand Marquis?

Accepted Answer

A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.

Question 6

Can I do a brake job myself?

Accepted Answer

A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.

Question 7

Are these parts guaranteed to fit my 2003 Ford Grand Marquis?

Accepted Answer

These parts are listed for the 2003 Ford Grand Marquis using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.

Question 8

What brands make brake job parts for the 2003 Ford Grand Marquis?

Accepted Answer

We carry brake job parts from trusted brands including Bendix, Centric Parts, MPA, Raybestos, and Hayden. Filter by brand to find your preferred manufacturer.

Question 9

How much does a brake job cost for a 2003 Ford Grand Marquis?

Accepted Answer

The cost of a brake job for the 2003 Ford Grand Marquis depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.

2003 Ford Grand Marquis Brake Job Parts

Brake Pads

BENDIX Fleet MetLok Brake Pad

BENDIX Fleet MetLok Brake Pad

BENDIX Fleet MetLok Police Disc Pad

BENDIX Fleet MetLok Police Disc Pad

BENDIX Premium Copper-Free

Posi Quiet Ceramic Brake Pads with Shims and Hardware

Posi Quiet Ceramic Brake Pads with Shims and Hardware

PQ PRO Disc Brake Pads with Hardware

Brake Rotors

BENDIX Disc Brake Rotor

BENDIX Disc Brake Rotor

C-Tek Standard Brake Rotor

C-Tek Standard Brake Rotor

Centric GCX Rotor with Full Coating

Quality-Built Black Series Coated Rotor

Quality-Built Black Series Coated Rotor

Raybestos Element3 Coated Brake Rotor

Brake Fluid

Engine Oil Cooler Metal Line Kit

Engine Oil Cooler Replacement Hose

Engine Oil Dipstick

Engine Oil Dipstick Tube - Metal

Engine Oil Pressure Sensor

High Performance Transmission Oil Cooler

High Performance Transmission Oil Cooler

Oil Cooler Installation Kit

Brake Job Checklist for Your 2003 Ford Grand Marquis

Brake Job for Other Ford Grand Marquis Years

Other Jobs for Your 2003 Ford Grand Marquis

Frequently Asked Questions