1967 Ford Mustang Brake Job Parts
Compare pads, rotors, and kits listed for your 1967 Ford Mustang. Check front or rear position, pad material, included hardware, and trim fitment before ordering.
Brake Pads
(13)primary
Centric Parts
Part # 102.00110
C-Tek Semi-Metallic Brake Pads with Shims
- Pad
- Semi-metallic
$35.06
Centric Parts
Part # 301.00110
Centric Premium Ceramic Brake Pads with Shims
- Pad
- Ceramic
$38.56
Dynamic Friction
Part # 4000-0011-00
DFC 4000 HybriDynamic Brake Pads
$33.41
Hawk Performance
Part # HB471F.510
Hawk HPS Street Brake Pads
$187.19
MPA
Part # 1000-0011M
QB Semi-Metallic Brake Pads
- Pad
- Semi-metallic
$33.00
Bendix
Part # SBC11
STOP BY BENDIX Disc Brake Pad
$26.74
EBC
Part # DP21157
EBC 65-69 Dodge Dart 2.8 Greenstuff Front Brake Pads
- Position
- Front
$189.07
EBC
Part # DP31157C
EBC 65-69 Dodge Dart 2.8 Redstuff Front Brake Pads
- Position
- Front
$210.05
Brake Rotors
(21)primary
Bendix
Part # PDR0139
BENDIX Brake Drum
$63.59
Bendix
Part # PDR0136
BENDIX Brake Drum
$78.09
Bendix
Part # PRT1017
BENDIX Disc Brake Rotor and Hub Assembly
$79.74
Centric Parts
Part # 123.61010
C-Tek Standard Brake Drum
$62.16
Centric Parts
Part # 123.61002
C-Tek Standard Brake Drum
$44.29
Centric Parts
Part # 122.61002
Centric Premium Brake Drum
$53.16
Centric Parts
Part # 122.61010
Centric Premium Brake Drum
$74.84
Hawk Performance
Part # HTC4033
Hawk Talon 1967 Ford Fairlane Drilled and Slotted Front Brake Rotor Set
- Position
- Front
- Rotor
- Drilled/slotted
$315.19
Brake Kits
(33)primary
Wilwood
Part # 140-12947
Wilwood Dynapro 6 Front Hub Kit 12.19in 1965-1969 Mustang Disc & Drum Spindle
- Position
- Front
$1452.20
Wilwood
Part # 140-12947-DR
Wilwood Dynapro 6 Front Hub Kit 12.19in Drill Red 1965-1969 Mustang Disc & Drum Spindle
- Position
- Front
$1575.56
Wilwood
Part # 140-12947-D
Wilwood Dynapro 6 Front Hub Kit 12.19in Drilled 1965-1969 Mustang Disc & Drum Spindle
- Position
- Front
- Rotor
- Drilled
$1594.76
Wilwood
Part # 140-12947-R
Wilwood Dynapro 6 Front Hub Kit 12.19in Red 1965-1969 Mustang Disc & Drum Spindle
- Position
- Front
$1452.20
Wilwood
Part # 140-13343
Wilwood Dynapro Dust-Boot Front Kit 11.00in 1965-1969 Mustang Disc & Drum Spindle
- Position
- Front
$1208.42
Wilwood
Part # 140-13343-D
Wilwood Dynapro Dust-Boot Front Kit 11.00in Drilled 1965-1969 Mustang Disc & Drum Spindle
- Position
- Front
- Rotor
- Drilled
$1350.98
Wilwood
Part # 140-13343-DR
Wilwood Dynapro Dust-Boot Front Kit 11.00in Drilled Red 1965-1969 Mustang Disc & Drum Spindle
- Position
- Front
- Rotor
- Drilled
$1350.98
Wilwood
Part # 140-13343-R
Wilwood Dynapro Dust-Boot Front Kit 11.00in Red 1965-1969 Mustang Disc & Drum Spindle
- Position
- Front
$1208.42
Brake Fluid
(48)consumable
ATP
Part # KO-1
ATP Automatic Transmission Oil Pump Seal
$10.73
Bosch
Part # 3500
Bosch Oil Filter
$9.75
EcoGard
Part # X1A-B
BULK OIL FILTERS
$4.26
Hayden
Part # 293
Engine Oil Cooler Metal Line Kit
$48.06
Hayden
Part # 112
Engine Oil Cooler Replacement Hose
$36.34
Rostra
Part # 50-1351
Engine Oil Pressure Switch
$12.14
Sealed Power
Part # 224-41128
Engine Oil Pump
$81.97
Sealed Power
Part # 224-41146
Engine Oil Pump
$60.09
Brake Job Checklist for Your 1967 Ford Mustang
Choose the axle first. Front and rear brake parts are usually different.
Compare pad material for your driving style, then inspect rotor wear before ordering.
Use a pad-and-rotor kit when both wear items are due on the same axle.
Brake Job for Other Ford Mustang Years
Other Jobs for Your 1967 Ford Mustang
Frequently Asked Questions
What parts do I need for a brake job on my 1967 Ford Mustang?
A complete brake job on the 1967 Ford Mustang usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.
Should I replace brake pads and rotors together on my 1967 Ford Mustang?
If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.
Ceramic or semi-metallic brake pads: which should I choose?
Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.
Do I need front or rear brake pads for my 1967 Ford Mustang?
Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.
How long does a brake job take on a 1967 Ford Mustang?
A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.
Can I do a brake job myself?
A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.
Are these parts guaranteed to fit my 1967 Ford Mustang?
These parts are listed for the 1967 Ford Mustang using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.
What brands make brake job parts for the 1967 Ford Mustang?
We carry brake job parts from trusted brands including Centric Parts, Dynamic Friction, Hawk Performance, MPA, and Bendix. Filter by brand to find your preferred manufacturer.
How much does a brake job cost for a 1967 Ford Mustang?
The cost of a brake job for the 1967 Ford Mustang depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.