Question 1

What parts do I need for a brake job on my 1997 Honda CBR900RR?

Accepted Answer

A complete brake job on the 1997 Honda CBR900RR usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.

Question 2

Should I replace brake pads and rotors together on my 1997 Honda CBR900RR?

Accepted Answer

If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.

Question 3

Ceramic or semi-metallic brake pads: which should I choose?

Accepted Answer

Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.

Question 4

Do I need front or rear brake pads for my 1997 Honda CBR900RR?

Accepted Answer

Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.

Question 5

How long does a brake job take on a 1997 Honda CBR900RR?

Accepted Answer

A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.

Question 6

Can I do a brake job myself?

Accepted Answer

A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.

Question 7

Are these parts guaranteed to fit my 1997 Honda CBR900RR?

Accepted Answer

These parts are listed for the 1997 Honda CBR900RR using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.

Question 8

What brands make brake job parts for the 1997 Honda CBR900RR?

Accepted Answer

We carry brake job parts from trusted brands including BikeMaster, Brembo OE Powersports, aFe, K&N, and LIQUI MOLY. Filter by brand to find your preferred manufacturer.

Question 9

How much does a brake job cost for a 1997 Honda CBR900RR?

Accepted Answer

The cost of a brake job for the 1997 Honda CBR900RR depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.

1997 Honda CBR900RR Brake Job Parts

Brake Pads

BikeMaster BM-174 Rear Brake Pads

BikeMaster BM-174 Sintered Rear Brake Pads

BikeMaster BM-187 Brake Pads

Brembo OE 92-96 Honda CBR F 400cc Brake Pad - Rear

Brembo OE 98-99 Honda CB Hornet (Japan) 600cc Sinter Brake Pad - Front

Brake Rotors

BikeMaster BM-1004 Brake Rotor

Brembo OE 89-91 Honda CB 400CC/89-91 Honda CB F/F1/F2 400CC 220x5mm Brake Disc - Front Fixed

Brembo OE 91-94 Honda RS R 125CC/91-94 Honda RS R 250CC 296x5mm Brake Disc - Front Floating

Brembo OE 98-99 Honda CBR RR Fireblade 900cc 310x5mm Brake Disc - Front Floating

Brake Fluid

aFe ProGuard Oil Filter - OE Repl. Yamaha 5GH-13440-50-00

aFe ProGuard Oil Filter - OE Repl. Yamaha 5GH-13440-50-00 (4 Pack)

K&N Honda / Kawasaki / Yamaha / Polaris / Victory 2.688in OD x 3.344in H Oil Filter

K&N Honda / Kawasaki / Yamaha / Polaris / Victory 2.688in OD x 3.344in H Oil Filter - Chrome

LIQUI MOLY 1L Brake Fluid DOT 4

LIQUI MOLY 1L Motorbike 4T SAE 10W40

LIQUI MOLY 1L Motorbike 4T SAE 20W50 Street

LIQUI MOLY 20L Motorbike 4T SAE 10W40

Brake Job Checklist for Your 1997 Honda CBR900RR

Brake Job for Other Honda CBR900RR Years

Other Jobs for Your 1997 Honda CBR900RR

Frequently Asked Questions