Question 1

What parts do I need for a brake job on my 1994 Honda CR125R?

Accepted Answer

A complete brake job on the 1994 Honda CR125R usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.

Question 2

Should I replace brake pads and rotors together on my 1994 Honda CR125R?

Accepted Answer

If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.

Question 3

Ceramic or semi-metallic brake pads: which should I choose?

Accepted Answer

Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.

Question 4

Do I need front or rear brake pads for my 1994 Honda CR125R?

Accepted Answer

Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.

Question 5

How long does a brake job take on a 1994 Honda CR125R?

Accepted Answer

A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.

Question 6

Can I do a brake job myself?

Accepted Answer

A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.

Question 7

Are these parts guaranteed to fit my 1994 Honda CR125R?

Accepted Answer

These parts are listed for the 1994 Honda CR125R using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.

Question 8

What brands make brake job parts for the 1994 Honda CR125R?

Accepted Answer

We carry brake job parts from trusted brands including BikeMaster, Brembo OE Powersports, and LIQUI MOLY. Filter by brand to find your preferred manufacturer.

Question 9

How much does a brake job cost for a 1994 Honda CR125R?

Accepted Answer

The cost of a brake job for the 1994 Honda CR125R depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.

1994 Honda CR125R Brake Job Parts

Brake Pads

BikeMaster BM-125 Brake Pads

BikeMaster BM-125 Sintered Brake Pads

BikeMaster BM-131 Brake Pads

Brembo OE 09-09 Fantic MX Regolarna Competizione 50cc Brake Pad - Rear

Brembo OE 13-24 Tm MX 85cc Sinter Brake Pad - Front

Brake Rotors

BikeMaster Honda Brake Rotor

Brembo OE 79-07 Honda CR125R/78-07 CR250R Supersport Brake Disc

Brembo OE 15-21 Honda CRF 250CC/19-23 Honda CRF RX 250CC 240x4mm Brake Disc - Rear Fixed

Brembo OE 89-94 Honda AX 1 75CC/07-12 Honda CRF M 230CC 240x4mm Brake Disc - Front Fixed

Brembo OE 95-03 Honda CR R 125CC/02-07 Honda CRE 250CC 240x3mm Brake Disc - Front Fixed

Brake Fluid

LIQUI MOLY 1L Brake Fluid DOT 4

LIQUI MOLY 1L Motorbike 2T Offroad

LIQUI MOLY 1L Motorbike 2T Synth Offroad Race

LIQUI MOLY 250mL Brake Fluid DOT 4

LIQUI MOLY 250mL Brake Fluid DOT 5.1

LIQUI MOLY 4L Motorbike 2T Synth Offroad Race

LIQUI MOLY 500mL Brake Fluid DOT 4

Brake Job Checklist for Your 1994 Honda CR125R

Brake Job for Other Honda CR125R Years

Other Jobs for Your 1994 Honda CR125R

Frequently Asked Questions