Question 1

What parts do I need for a brake job on my 1995 Honda PC800 Pacific Coast?

Accepted Answer

A complete brake job on the 1995 Honda PC800 Pacific Coast usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.

Question 2

Should I replace brake pads and rotors together on my 1995 Honda PC800 Pacific Coast?

Accepted Answer

If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.

Question 3

Ceramic or semi-metallic brake pads: which should I choose?

Accepted Answer

Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.

Question 4

Do I need front or rear brake pads for my 1995 Honda PC800 Pacific Coast?

Accepted Answer

Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.

Question 5

How long does a brake job take on a 1995 Honda PC800 Pacific Coast?

Accepted Answer

A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.

Question 6

Can I do a brake job myself?

Accepted Answer

A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.

Question 7

Are these parts guaranteed to fit my 1995 Honda PC800 Pacific Coast?

Accepted Answer

These parts are listed for the 1995 Honda PC800 Pacific Coast using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.

Question 8

What brands make brake job parts for the 1995 Honda PC800 Pacific Coast?

Accepted Answer

We carry brake job parts from trusted brands including BikeMaster, Brembo OE Powersports, aFe, K&N, and LIQUI MOLY. Filter by brand to find your preferred manufacturer.

Question 9

How much does a brake job cost for a 1995 Honda PC800 Pacific Coast?

Accepted Answer

The cost of a brake job for the 1995 Honda PC800 Pacific Coast depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.

1995 Honda PC800 Pacific Coast Brake Job Parts

Brake Pads

BikeMaster BM-142 Sintered Brake Pads

Brembo OE 17-19 Suzuki DL250L8 V-Strom/2020 DL250L8 V-Strom ABS Sinter LA Brake Pad - Front L/R

Brembo OE 01-09 Buell Blast 500cc Brake Pad - Front

Brembo OE 99-04 Cagiva Gran Canyon 900cc Sinter Brake Pad - Front

Brembo OE Sinter Xtra Brake Pad

Brake Rotors

Brembo OE 91-94 Honda CBR F/Super Sport 600CC/83-88 XLV R 750CC 276x5mm Brake Disc - Front Fixed

Brake Fluid

aFe ProGuard Oil Filter - OE Repl. Yamaha 5GH-13440-50-00

aFe ProGuard Oil Filter - OE Repl. Yamaha 5GH-13440-50-00 (4 Pack)

K&N Honda / Kawasaki / Yamaha / Polaris / Victory 2.688in OD x 3.344in H Oil Filter

K&N Honda / Kawasaki / Yamaha / Polaris / Victory 2.688in OD x 3.344in H Oil Filter - Chrome

LIQUI MOLY 1L Brake Fluid DOT 4

LIQUI MOLY 1L Hypoid Gear Oil (GL5) SAE 85W90

LIQUI MOLY 1L Motorbike 4T SAE 10W40

LIQUI MOLY 1L Motorbike 4T SAE 10W40 Offroad

Brake Job Checklist for Your 1995 Honda PC800 Pacific Coast

Brake Job for Other Honda PC800 Pacific Coast Years

Other Jobs for Your 1995 Honda PC800 Pacific Coast

Frequently Asked Questions