Question 1

What parts do I need for a brake job on my 1987 Honda XL600V Transalp?

Accepted Answer

A complete brake job on the 1987 Honda XL600V Transalp usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.

Question 2

Should I replace brake pads and rotors together on my 1987 Honda XL600V Transalp?

Accepted Answer

If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.

Question 3

Ceramic or semi-metallic brake pads: which should I choose?

Accepted Answer

Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.

Question 4

Do I need front or rear brake pads for my 1987 Honda XL600V Transalp?

Accepted Answer

Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.

Question 5

How long does a brake job take on a 1987 Honda XL600V Transalp?

Accepted Answer

A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.

Question 6

Can I do a brake job myself?

Accepted Answer

A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.

Question 7

Are these parts guaranteed to fit my 1987 Honda XL600V Transalp?

Accepted Answer

These parts are listed for the 1987 Honda XL600V Transalp using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.

Question 8

What brands make brake job parts for the 1987 Honda XL600V Transalp?

Accepted Answer

We carry brake job parts from trusted brands including Brembo OE Powersports, K&N, and LIQUI MOLY. Filter by brand to find your preferred manufacturer.

Question 9

How much does a brake job cost for a 1987 Honda XL600V Transalp?

Accepted Answer

The cost of a brake job for the 1987 Honda XL600V Transalp depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.

1987 Honda XL600V Transalp Brake Job Parts

Brake Pads

Brembo OE 01-09 Buell XB9R Firebolt 984cc Brake Pad - Rear

Brembo OE 15-23 Brixton Cromwell 1200cc Sinter Brake Pad - Front

Brembo OE 83-89 Honda CB TDC 125cc Brake Pad - Front

Brembo OE 85-85 Honda NS R 500cc Sinter Brake Pad - Front

Brembo OE 99-01 Cagiva Canyon 500cc Sinter Brake Pad - Front

Brembo OE Sinter Prime Brake Pad

Brake Rotors

Brembo OE 18-21 Honda NSS Forza 300CC/14-17 Honda NSS Forza 300CC 240x5mm Brake Disc - Rear Fixed

Brembo OE 85-89 Honda CB S 450CC/16-21 Honda XR L 650CC 256x4mm Brake Disc - Front Fixed

Brembo OE 91-94 Honda CBR F/Super Sport 600CC/83-88 XLV R 750CC 276x5mm Brake Disc - Front Fixed

Brake Fluid

K&N Honda / Kawasaki / Yamaha / Polaris / Victory 2.688in OD x 3.344in H Oil Filter

K&N Honda / Kawasaki / Yamaha / Polaris / Victory 2.688in OD x 3.344in H Oil Filter - Chrome

LIQUI MOLY 1L Brake Fluid DOT 4

LIQUI MOLY 1L Motorbike 4T SAE 10W40

LIQUI MOLY 1L Motorbike 4T SAE 10W40 Offroad

LIQUI MOLY 1L Motorbike 4T SAE 10W40 Street

LIQUI MOLY 1L Motorbike 4T Synth SAE 10W50 Offroad Race

LIQUI MOLY 1L Motorbike 4T Synth SAE 10W50 Street Race

Brake Job Checklist for Your 1987 Honda XL600V Transalp

Brake Job for Other Honda XL600V Transalp Years

Other Jobs for Your 1987 Honda XL600V Transalp

Frequently Asked Questions