Question 1

What parts do I need for a brake job on my 1979 Mazda RX-7?

Accepted Answer

A complete brake job on the 1979 Mazda RX-7 usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.

Question 2

Should I replace brake pads and rotors together on my 1979 Mazda RX-7?

Accepted Answer

If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.

Question 3

Ceramic or semi-metallic brake pads: which should I choose?

Accepted Answer

Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.

Question 4

Do I need front or rear brake pads for my 1979 Mazda RX-7?

Accepted Answer

Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.

Question 5

How long does a brake job take on a 1979 Mazda RX-7?

Accepted Answer

A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.

Question 6

Can I do a brake job myself?

Accepted Answer

A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.

Question 7

Are these parts guaranteed to fit my 1979 Mazda RX-7?

Accepted Answer

These parts are listed for the 1979 Mazda RX-7 using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.

Question 8

What brands make brake job parts for the 1979 Mazda RX-7?

Accepted Answer

We carry brake job parts from trusted brands including Centric Parts, Dynamic Friction, DFC, EBC, and Hawk Performance. Filter by brand to find your preferred manufacturer.

Question 9

How much does a brake job cost for a 1979 Mazda RX-7?

Accepted Answer

The cost of a brake job for the 1979 Mazda RX-7 depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.

1979 Mazda RX-7 Brake Job Parts

Brake Pads

Centric Select Pack Single Axle Front Brake Kit

DFC 4000 HybriDynamic Brake Pads

DFC 70-85 Ford Courier (USA/Canada) Front 5000 Advanced Ceramic Brake Pads

DFC 79-79 Mazda RX-7 Front 4000 HybriDynamic Brake Pads and Hardware Kit

DFC 79-79 Mazda RX-7 Front 5000 Advanced Ceramic Brake Pads and Hardware Kit

EBC 78-83 Mazda RX7 2.3 (1.1 Rotary)(Rear Drums) Ultimax2 Front Brake Pads

Hawk 79-84 Mazda B2000 / 70-74 RX-2 / 74-78 RX-4 / 79-85 RX-7 Blue 9012 Front Race Brake Pads

Hawk HPS Street Brake Pads

Brake Rotors

C-Tek Standard Brake Rotor

DFC 79-83 Mazda RX-7 Front Brake Rotor

DFC Brake Rotors - Blank

EBC 78-83 Mazda RX7 2.3 (1.1 Rotary)(Rear Drums) Premium Front Rotors

R1 79-83 Mazda RX-7 Front Left Drilled & Slotted Black Brake Rotor

R1 79-83 Mazda RX-7 Front Right Drilled & Slotted Black Brake Rotor

EBC S1 Brake Pad and Rotor Kit

ROTOR KIT

Brake Fluid

Bosch Oil Filter

Bosch Oil Filter

Engine Oil Cooler Metal Line Kit

Engine Oil Cooler Replacement Hose

High Performance Transmission Oil Cooler

High Performance Transmission Oil Cooler

Oil Cooler Coupling

Oil Cooler Replacement Hose

Brake Job Checklist for Your 1979 Mazda RX-7

Brake Job for Other Mazda RX-7 Years

Other Jobs for Your 1979 Mazda RX-7

Frequently Asked Questions