Question 1

What parts do I need for a brake job on my 1972 Mercedes-Benz 220?

Accepted Answer

A complete brake job on the 1972 Mercedes-Benz 220 usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.

Question 2

Should I replace brake pads and rotors together on my 1972 Mercedes-Benz 220?

Accepted Answer

If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.

Question 3

Ceramic or semi-metallic brake pads: which should I choose?

Accepted Answer

Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.

Question 4

Do I need front or rear brake pads for my 1972 Mercedes-Benz 220?

Accepted Answer

Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.

Question 5

How long does a brake job take on a 1972 Mercedes-Benz 220?

Accepted Answer

A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.

Question 6

Can I do a brake job myself?

Accepted Answer

A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.

Question 7

Are these parts guaranteed to fit my 1972 Mercedes-Benz 220?

Accepted Answer

These parts are listed for the 1972 Mercedes-Benz 220 using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.

Question 8

What brands make brake job parts for the 1972 Mercedes-Benz 220?

Accepted Answer

We carry brake job parts from trusted brands including Akebono, Bosch, Centric Parts, Dynamic Friction, and DFC. Filter by brand to find your preferred manufacturer.

Question 9

How much does a brake job cost for a 1972 Mercedes-Benz 220?

Accepted Answer

The cost of a brake job for the 1972 Mercedes-Benz 220 depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.

1972 Mercedes-Benz 220 Brake Job Parts

Brake Pads

Akebono EURO Ultra Premium Ceramic Disc Brake Pad Kit

Bosch Brake Pads

Bosch QuietCast Brake Pads

Centric Premium Ceramic Brake Pads with Shims

DFC 4000 HybriDynamic Brake Pads

DFC 4000 HybriDynamic Brake Pads

DFC 61-04 Alfa Romeo Alfeta Front/Rear 5000 Advanced Low Metallic Brake Pads

DFC 61-04 Alfa Romeo Alfeta Front/Rear Active Performance Pads - Low Metallic

Brake Rotors

C-Tek Standard Brake Rotor

C-Tek Standard Brake Rotor

Centric GCX Rotor with Full Coating and High Carbon Content

Centric Premium High Carbon Alloy Brake Rotor

DFC 61-91 Mercedes-Benz 380SL Rear GeoSPEC Coated Rotor

DFC 61-91 Mercedes-Benz 380SLC Rear Right Drilled & Slotted Silver Brake Rotor

DFC 61-91 Mercedes-Benz 500SEC Rear Brake Rotor

DFC 61-91 Mercedes-Benz 500SEC Rear Left Drilled & Slotted Silver Brake Rotor

Brake Fluid

OIL DRAIN PLUG

OIL FILLER CAP

OIL FILTER

Seal, Oil Filler Neck Cap

Brake Job Checklist for Your 1972 Mercedes-Benz 220

Brake Job for Other Mercedes-Benz 220 Years

Other Jobs for Your 1972 Mercedes-Benz 220

Frequently Asked Questions