1968 Mercedes-Benz 250SL Brake Job Parts
Compare pads, rotors, and kits listed for your 1968 Mercedes-Benz 250SL. Check front or rear position, pad material, included hardware, and trim details before ordering.
Brake Pads
(62)primary
Dynamic Friction
Part # 4000-0031-00
DFC 4000 HybriDynamic Brake Pads
$27.65
Dynamic Friction
Part # 4000-0004-00
DFC 4000 HybriDynamic Brake Pads
$37.27
Dynamic Friction
Part # 4000-0045-00
DFC 4000 HybriDynamic Brake Pads
$29.20
DFC
Part # 1551-0004-00
DFC 58-89 AC Cobra Front 5000 Advanced Low Metallic Brake Pads
- Position
- Front
- Pad
- Low-metallic
$47.83
DFC
Part # 1551-0031-00
DFC 61-04 Alfa Romeo Alfeta Front/Rear 5000 Advanced Low Metallic Brake Pads
- Position
- Front/Rear
- Pad
- Low-metallic
$31.70
DFC
Part # 1115-0031-00
DFC 61-04 Alfa Romeo Alfeta Front/Rear Active Performance Pads - Low Metallic
- Position
- Front/Rear
- Pad
- Low-metallic
$49.68
DFC
Part # 1600-0031-00
DFC 61-04 Alfa Romeo DUETTO 1600 Rear/Front Euro 5000 Ceramic Brake Pads
- Position
- Front/Rear
- Pad
- Ceramic
$33.36
DFC
Part # 4000-0004-01
DFC 61-79 Jaguar XKE Front 4000 HybriDynamic Brake Pads and Hardware Kit
- Position
- Front
- Hardware
- Included
$41.27
Brake Rotors
(27)primary
DFC
Part # 604-63003
DFC 61-91 Mercedes-Benz 380SL Rear GeoSPEC Coated Rotor
- Position
- Rear
- Finish
- Coated
$33.73
DFC
Part # 631-63003R
DFC 61-91 Mercedes-Benz 380SLC Rear Right Drilled & Slotted Silver Brake Rotor
- Position
- Rear
- Rotor
- Drilled/slotted
$65.70
DFC
Part # 600-63003
DFC 61-91 Mercedes-Benz 500SEC Rear Brake Rotor
- Position
- Rear
$29.71
DFC
Part # 631-63003L
DFC 61-91 Mercedes-Benz 500SEC Rear Left Drilled & Slotted Silver Brake Rotor
- Position
- Rear
- Rotor
- Drilled/slotted
$65.70
DFC
Part # 631-63002R
DFC 65-73 Mercedes-Benz 280SE Front Right Drilled & Slotted Silver Brake Rotor
- Position
- Front
- Rotor
- Drilled/slotted
$83.74
DFC
Part # 600-63002
DFC 65-73 Mercedes-Benz 280SL Front Brake Rotor
- Position
- Front
$36.75
DFC
Part # 631-63002L
DFC 65-73 Mercedes-Benz 300SEL Front Left Drilled & Slotted Silver Brake Rotor
- Position
- Front
- Rotor
- Drilled/slotted
$83.74
Dynamic Friction
Part # 6004-63002
DFC Brake Rotors - Blank
- Rotor
- Blank
$145.70
Brake Fluid
(1)consumable
Brake Job Checklist for Your 1968 Mercedes-Benz 250SL
Choose the axle first. Front and rear brake parts are usually different.
Compare pad material for your driving style, then inspect rotor wear before ordering.
Use a pad-and-rotor kit when both wear items are due on the same axle.
Brake Job for Other Mercedes-Benz 250SL Years
Other Jobs for Your 1968 Mercedes-Benz 250SL
Frequently Asked Questions
What parts do I need for a brake job on my 1968 Mercedes-Benz 250SL?
A complete brake job on the 1968 Mercedes-Benz 250SL usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.
Should I replace brake pads and rotors together on my 1968 Mercedes-Benz 250SL?
If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.
Ceramic or semi-metallic brake pads: which should I choose?
Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.
Do I need front or rear brake pads for my 1968 Mercedes-Benz 250SL?
Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.
How long does a brake job take on a 1968 Mercedes-Benz 250SL?
A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.
Can I do a brake job myself?
A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.
Are these parts guaranteed to fit my 1968 Mercedes-Benz 250SL?
These parts are listed for the 1968 Mercedes-Benz 250SL using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.
What brands make brake job parts for the 1968 Mercedes-Benz 250SL?
We carry brake job parts from trusted brands including Dynamic Friction, DFC, and Dorman. Filter by brand to find your preferred manufacturer.
How much does a brake job cost for a 1968 Mercedes-Benz 250SL?
The cost of a brake job for the 1968 Mercedes-Benz 250SL depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.