Question 1

What parts do I need for a brake job on my 1987 Mercedes-Benz 300D?

Accepted Answer

A complete brake job on the 1987 Mercedes-Benz 300D usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.

Question 2

Should I replace brake pads and rotors together on my 1987 Mercedes-Benz 300D?

Accepted Answer

If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.

Question 3

Ceramic or semi-metallic brake pads: which should I choose?

Accepted Answer

Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.

Question 4

Do I need front or rear brake pads for my 1987 Mercedes-Benz 300D?

Accepted Answer

Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.

Question 5

How long does a brake job take on a 1987 Mercedes-Benz 300D?

Accepted Answer

A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.

Question 6

Can I do a brake job myself?

Accepted Answer

A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.

Question 7

Are these parts guaranteed to fit my 1987 Mercedes-Benz 300D?

Accepted Answer

These parts are listed for the 1987 Mercedes-Benz 300D using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.

Question 8

What brands make brake job parts for the 1987 Mercedes-Benz 300D?

Accepted Answer

We carry brake job parts from trusted brands including Centric Parts, Dynamic Friction, DFC, Bendix, and Bosch. Filter by brand to find your preferred manufacturer.

Question 9

How much does a brake job cost for a 1987 Mercedes-Benz 300D?

Accepted Answer

The cost of a brake job for the 1987 Mercedes-Benz 300D depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.

1987 Mercedes-Benz 300D Brake Job Parts

Brake Pads

Centric Preferred Pack Single Axle Front Disc Brake Kit

Centric Premium Semi-Metallic Brake Pads with Shims and Hardware

DFC 4000 HybriDynamic Brake Pads

DFC 83-95 Mercedes-Benz 300CE Rear Euro 5000 Ceramic Brake Pads

DFC 83-95 Mercedes-Benz 300D Rear Euro 5000 Ceramic Brake Pads and Hardware Kit

DFC 83-95 Mercedes-Benz C220 Rear 5000 Advanced Low Metallic Brake Pads and Hardware Kit

DFC 83-95 Mercedes-Benz C280 Rear 4000 HybriDynamic Brake Pads and Hardware Kit

DFC 83-95 Mercedes-Benz E300 Rear 5000 Advanced Low Metallic Brake Pads

Brake Rotors

BENDIX Disc Brake Rotor

Bosch QuietCast Disc Brake Rotor

Brembo 84-89 Mercedes-Benz 190D/84-93 190E/87-89 260E Rear Premium OE Equivalent Rotor

Brembo 86-87 Mercedes 190E/87-89 260E/88-89 300CE/1995 E300 Front Premium OE Equivalent Rotor

C-Tek Standard Brake Rotor

C-Tek Standard Brake Rotor

Centric GCX Rotor with Full Coating

Centric Premium High Carbon Alloy Brake Rotor

Brake Fluid

Engine Oil Pressure Switch

gpd Engine Oil Pressure Switch

Hydraulic Oil Filter

Motul 1/2L Brake Fluid DOT 5.1

Motul 1L Transmission DEXRON III - Technosynthese

Motul 1L Transmission GEAR 300 75W90 - Synthetic Ester

Oil Drain Plug Standard M12-1.50, Head Size 17mm