1978 Nissan 200SX Brake Job Parts
Compare pads, rotors, and kits listed for your 1978 Nissan 200SX. Check front or rear position, pad material, included hardware, and trim fitment before ordering.
Brake Pads
(12)primary
Dynamic Friction
DFC 4000 HybriDynamic Brake Pads
$20.49
DFC
DFC 74-82 Honda Civic Front 5000 Advanced Ceramic Brake Pads
- Position
- Front
- Pad
- Ceramic
$22.98
DFC
DFC 74-82 Honda Civic Front 5000 Advanced Ceramic Brake Pads and Hardware Kit
- Position
- Front
- Pad
- Ceramic
$28.54
Dynamic Friction
DFC Rotors-Drilled & Slotted-Silver w/ 5000 Advanced Brake Pads Incl Hdw
$210.24
GMB
Engine Water Pump with Severe Duty Fan Clutch
$67.45
Centric Parts
Posi Quiet Ceramic Brake Pads with Shims
- Pad
- Ceramic
$15.15
MPA
Quality-Built Black Series Ceramic Brake Pads
- Pad
- Ceramic
$18.22
R1 Concepts
R1 1974-1982 Honda Civic Wagon Front R1 Optimum OE Pads & Hardware Kit
$28.54
Brake Rotors
(16)primary
Bendix
BENDIX Brake Drum
$47.37
Bendix
BENDIX Disc Brake Rotor
$33.10
Centric Parts
C-Tek Standard Brake Drum
$31.45
Centric Parts
C-Tek Standard Brake Rotor
$26.40
Centric Parts
Centric Premium Brake Drum
$45.96
DFC
DFC 75-82 Nissan 210 Front Left Drilled & Slotted Silver Brake Rotor
$52.34
DFC
DFC 75-82 Nissan 610 Front Brake Rotor
$23.16
DFC
DFC 75-82 Nissan 610 Front Right Drilled & Slotted Silver Brake Rotor
$52.34
Brake Fluid
(32)consumable
Bosch
Bosch Oil Filter
$9.77
EcoGard
BULK OIL FILTERS
$4.27
DJ Rock
Engine Cylinder Block Lubricating Oil Pump Assembly
$66.90
Hayden
Engine Oil Cooler Metal Line Kit
$48.14
Hayden
Engine Oil Cooler Replacement Hose
$36.40
GPD
gpd Engine Oil Pressure Switch
$15.80
GPD
gpd Engine Oil Pressure Switch
$9.21
Hayden
High Performance Transmission Oil Cooler
$49.55
Brake Job Checklist for Your 1978 Nissan 200SX
Choose the axle first. Front and rear brake parts are usually different.
Compare pad material for your driving style, then inspect rotor wear before ordering.
Use a pad-and-rotor kit when both wear items are due on the same axle.
Brake Job for Other Nissan 200SX Years
Other Jobs for Your 1978 Nissan 200SX
Frequently Asked Questions
What parts do I need for a brake job on my 1978 Nissan 200SX?
A complete brake job on the 1978 Nissan 200SX usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.
Should I replace brake pads and rotors together on my 1978 Nissan 200SX?
If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.
Ceramic or semi-metallic brake pads: which should I choose?
Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.
Do I need front or rear brake pads for my 1978 Nissan 200SX?
Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.
How long does a brake job take on a 1978 Nissan 200SX?
A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.
Can I do a brake job myself?
A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.
Are these parts guaranteed to fit my 1978 Nissan 200SX?
These parts are listed for the 1978 Nissan 200SX using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.
What brands make brake job parts for the 1978 Nissan 200SX?
We carry brake job parts from trusted brands including Dynamic Friction, DFC, GMB, Centric Parts, and MPA. Filter by brand to find your preferred manufacturer.
How much does a brake job cost for a 1978 Nissan 200SX?
The cost of a brake job for the 1978 Nissan 200SX depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.