1984 Nissan Maxima Brake Job Parts
Compare pads, rotors, and kits listed for your 1984 Nissan Maxima. Check front or rear position, pad material, included hardware, and trim fitment before ordering.
Brake Pads
(49)primary
Bosch
Part # BE230
Bosch Brake Pads
$14.20
Centric Parts
Part # 103.03230
C-Tek Ceramic Brake Pads with Shims
- Pad
- Ceramic
$23.76
Centric Parts
Part # 102.03230
C-Tek Semi-Metallic Brake Pads with Shims
- Pad
- Semi-metallic
$21.50
Centric Parts
Part # 301.02660
Centric Premium Ceramic Brake Pads with Shims and Hardware
- Pad
- Ceramic
- Hardware
- Included
$33.36
Dynamic Friction
Part # 4000-0266-00
DFC 4000 HybriDynamic Brake Pads
$30.99
Dynamic Friction
Part # 4000-0274-00
DFC 4000 HybriDynamic Brake Pads
$30.33
Dynamic Friction
Part # 4000-0323-00
DFC 4000 HybriDynamic Brake Pads
$24.67
DFC
Part # 4000-0266-01
DFC 82-97 Infiniti M30 Front 4000 HybriDynamic Brake Pads and Hardware Kit
- Position
- Front
- Hardware
- Included
$36.63
Brake Rotors
(47)primary
Bendix
Part # PDR0324
BENDIX Brake Drum
$47.30
Centric Parts
Part # 123.42001
C-Tek Standard Brake Drum
$40.38
Centric Parts
Part # 121.42027
C-Tek Standard Brake Rotor
$52.75
Centric Parts
Part # 122.42001
Centric Premium Brake Drum
$54.87
DFC
Part # 600-67008
DFC 81-88 Nissan 200SX Front Brake Rotor
- Position
- Front
$26.75
DFC
Part # 631-67012L
DFC 82-88 Nissan 200SX Rear Left Drilled & Slotted Silver Brake Rotor
- Position
- Rear
- Rotor
- Drilled/slotted
$59.35
DFC
Part # 600-67012
DFC 82-88 Nissan 280ZX Rear Brake Rotor
- Position
- Rear
$27.15
DFC
Part # 631-67012R
DFC 82-88 Nissan 280ZX Rear Right Drilled & Slotted Silver Brake Rotor
- Position
- Rear
- Rotor
- Drilled/slotted
$59.35
Brake Fluid
(34)consumable
EcoGard
Part # X4670
ECOGARD Oil Filter
$3.35
DJ Rock
Part # OP602
Engine Cylinder Block Lubricating Oil Pump Assembly
$74.77
Hayden
Part # 293
Engine Oil Cooler Metal Line Kit
$48.06
Hayden
Part # 112
Engine Oil Cooler Replacement Hose
$36.34
Standard Motor Products
Part # PS-198
Engine Oil Pressure Switch
$18.70
Hayden
Part # 512
High Performance Transmission Oil Cooler
$49.47
Hayden
Part # 516
High Performance Transmission Oil Cooler
$61.36
Holstein Parts
Part # 2PCV0003
Holstein Parts 2PCV0003 PCV Valve
$9.15
Brake Job Checklist for Your 1984 Nissan Maxima
Choose the axle first. Front and rear brake parts are usually different.
Compare pad material for your driving style, then inspect rotor wear before ordering.
Use a pad-and-rotor kit when both wear items are due on the same axle.
Brake Job for Other Nissan Maxima Years
Other Jobs for Your 1984 Nissan Maxima
Frequently Asked Questions
What parts do I need for a brake job on my 1984 Nissan Maxima?
A complete brake job on the 1984 Nissan Maxima usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.
Should I replace brake pads and rotors together on my 1984 Nissan Maxima?
If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.
Ceramic or semi-metallic brake pads: which should I choose?
Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.
Do I need front or rear brake pads for my 1984 Nissan Maxima?
Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.
How long does a brake job take on a 1984 Nissan Maxima?
A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.
Can I do a brake job myself?
A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.
Are these parts guaranteed to fit my 1984 Nissan Maxima?
These parts are listed for the 1984 Nissan Maxima using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.
What brands make brake job parts for the 1984 Nissan Maxima?
We carry brake job parts from trusted brands including Bosch, Centric Parts, Dynamic Friction, DFC, and Bendix. Filter by brand to find your preferred manufacturer.
How much does a brake job cost for a 1984 Nissan Maxima?
The cost of a brake job for the 1984 Nissan Maxima depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.