Question 1

What parts do I need for a brake job on my 1986 Toyota MR2?

Accepted Answer

A complete brake job on the 1986 Toyota MR2 usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.

Question 2

Should I replace brake pads and rotors together on my 1986 Toyota MR2?

Accepted Answer

If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.

Question 3

Ceramic or semi-metallic brake pads: which should I choose?

Accepted Answer

Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.

Question 4

Do I need front or rear brake pads for my 1986 Toyota MR2?

Accepted Answer

Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.

Question 5

How long does a brake job take on a 1986 Toyota MR2?

Accepted Answer

A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.

Question 6

Can I do a brake job myself?

Accepted Answer

A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.

Question 7

Are these parts guaranteed to fit my 1986 Toyota MR2?

Accepted Answer

These parts are listed for the 1986 Toyota MR2 using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.

Question 8

What brands make brake job parts for the 1986 Toyota MR2?

Accepted Answer

We carry brake job parts from trusted brands including Advics, Bosch, Centric Parts, Bendix, and DFC. Filter by brand to find your preferred manufacturer.

Question 9

How much does a brake job cost for a 1986 Toyota MR2?

Accepted Answer

The cost of a brake job for the 1986 Toyota MR2 depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.

1986 Toyota MR2 Brake Job Parts

Brake Pads

ADVICS Ultra-Premium Ceramic Brake Pads

Bosch Brake Pads

Bosch Brake Pads

Bosch QuietCast Brake Pads

C-Tek Ceramic Brake Pads with Shims

C-Tek Semi-Metallic Brake Pads with Shims

Centric Premium Ceramic Brake Pads with Shims and Hardware

Centric Premium Semi-Metallic Brake Pads with Shims and Hardware

Brake Rotors

BENDIX Disc Brake Rotor

C-Tek Standard Brake Rotor

Centric GCX Rotor with Full Coating

DFC 85-86 Toyota MR2 Rear Brake Rotor

DFC 85-86 Toyota MR2 Rear Left Drilled & Slotted Silver Brake Rotor

DFC 85-86 Toyota MR2 Rear Right Drilled & Slotted Silver Brake Rotor

DFC 85-88 Chevrolet Nova Front Brake Rotor

DFC 85-88 Chevrolet Nova Front Left Drilled & Slotted Silver Brake Rotor

Brake Fluid

ATP Automatic Transmission Oil Pump Seal

Bosch Oil Filter

Bosch Oil Filter

Engine Oil Cooler Metal Line Kit

Engine Oil Cooler Replacement Hose

Engine Oil Filler Cap

Engine Oil Filter

Engine Oil Pressure Switch

Brake Job Checklist for Your 1986 Toyota MR2

Brake Job for Other Toyota MR2 Years

Other Jobs for Your 1986 Toyota MR2

Frequently Asked Questions