Permatex Anaerobic Gasket Maker - 50ml

OEM specified. Noncorrosive gasketing material designed primarily for use on aluminum, iron, and steel flanged mating surfaces.
Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable. Fills gaps up to .015" and cures to a
solvent-resistant seal that will not tear or decay during service. Parts disassemble easily even after extended service.
Old gasket material can be removed in minutes with a simple putty knife.

To Make a Gasket:

1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.

2. Spray Permatex® Surface Prep™ activator on one surface only. Allow to dry 1-2 minutes.

3. Apply a continuous bead of sealant to the unprimed surface.

4. Assemble mating surfaces with minimal lateral movement.
   Excess sealant can be wiped awaywith a cloth and shop solvent.

To Dress a Gasket:

1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.

2. Spray Permatex® Surface Prep™ activator to both flange surfaces. Allow to dry 1-2 minutes.

3. Completely cover both sides of the precut gasket with sealant.

4. Place coated gasket on flange, and assemble mating surfaces with minimal lateral movement.