AEM 139 BAR MAP or 2000 PSIA Stainless Steel Sensor Kit

There are many different tools that can be used for measurement, but the degree of accuracy is dependent upon the tool. For example, a ruler can measure distance with a good degree of accuracy, but for a more precise measurement a caliper should be used. The difference between a brass pressure sensor and a stainless steel pressure sensor is similar if we think about it in these terms:AEM offers high quality stainless steel PSIg sensors in 100, 150, 500, 1,000, and 2,000. Gauge style pressure sensors reference pressure above atmospheric pressure. When exposed to atmospheric pressure, gauge style pressure sensors will read 0 psig. Gauge style pressure sensors are commonly used for oil pressure, fuel pressure, brake pressure, nitrous pressure etc.2000 PSIg Stainless Sensor Kit. Stainless Steel Sensor Body. 1/8 in NPT Male Thread. Includes: 2000 PSIg Stainless Sensor, Connector, Pins & 1/8 in NPT to -4 AdapterExample: Brass Pressure Sensor used for a Boost Gauge - Reference/Information for knowing manifold pressure, not for ECU calibration.Use a Brass Pressure Gauge Sensor where you need a good reference to what pressure is being seen.Example: MAP Sensor information for the ECU - Calibration/crucial information for the ECU.Use a SS Pressure Sensor where you need exact details of the pressure.Stainless Steel Pressure Sensor = CaliperWhich Pressure Sensor is right for you?Gauge style (PSIg) Pressure SensorsBrass Pressure Sensor = Ruler

Description

AEM 2000 PSIg Stainless Sensor Kit