What hardware do I need to install this ARB awning bracket?

This ARB awning bracket (813402) is not supplied with hardware. It is recommended to use T-bolts and channel nuts that are compatible with your specific roof bar system.

How should I mount the awning bracket to my roof bar?

ARB recommends using at least two, but preferably three, 8mm bolts to mount the bracket to your roof bar for maximum strength. The outer bolt hole between the gussets must always be used for the gusset to be effective.

What is the difference between this bracket and the OS3071?

The OS850 bracket (813402) is a newer, upgraded design with welded gussets for additional strength, intended for off-road or extreme conditions. The older OS3071 has been upgraded from 3mm to 4mm construction but is considered lighter duty and designated for highway use only.

ARB Awning Bracket 813402 - 50mm Wide with Gusset

Name: ARB Awning Bkt 50mm2 With Gusset
Brand: ARB
SKU: arb-arb-awning-bkt-50mm2-with-gusset-t14-220994
Price: 15.95 USD
Availability: InStock

ARB Awning Bkt 50mm2 With Gusset

$15.95

In Stock

ARB 813402 awning bracket. 50mm wide with gusset for extra strength on off-road vehicles. Zinc plated and powder coated.

Key Features

50mm wide bracket — fits over Thule SquareBar and Rhino Heavy Duty bars when inverted.
Welded gussets — add strength for awnings mounted on off-road vehicles.
Zinc plated and powder coated — resists corrosion.
Mounts upright or inverted — offers flexible installation options.
Pre-drilled for 8mm bolts — requires at least two, preferably three, bolts for secure mounting.
Slotted 6mm holes — for attaching the awning.

Secure CheckoutFast Shipping631-982-0042

Product Details

The OS850 awning bracket is designed with welded gussets to provide additional strength when awnings are mounted to roof bars on vehicles used off road or under extreme conditions. Zinc plated and powder coated for corrosion resistance and designed to mount either upright or inverted, the OS850 awning bracket is 50 mm wide allowing it to fit over both Thule SquareBar and Rhino Heavy Duty in the inverted position, or upright using T-bolts or channel nuts on Thule ProfessionalBar, WingBar and AeroBar or Rhino Heavy Duty. Pre-drilled to accept 8mm bolts, at least 2, but preferably 3 bolts should be used to mount to the roof bar for maximum strength. The outer bolt hole between the gussets must always be used for the gusset to be effective. Three slotted 6mm holes are provided to mount the awning. The 813402 awning bracket is not supplied with hardware. Due to different bar designs, it is recommended to use T-bolts and channel nuts supplied by the roof bar manufacturer. Units are now in stock with additional shipments due mid June. The current awning bracket P/No OS3071 has recently been upgraded from 3mm to 4mm construction however it is considered lighter duty and designated for highway use.