BBS SX 20x9 5x108 ET38 Gloss Platinum Diamond Cut Face Wheel -82mm PFS/Clip Required

What you get with this order is one BBS SX wheel, measuring 20 inches in diameter and 9 inches wide. It features a 5x108 bolt pattern with a +38 offset (ET38), and a Gloss Platinum finish with a Diamond Cut Face. This wheel is designed for a -82mm center bore and requires a PFS/clip system for installation.

BBS is well-known for making strong, well-built wheels, and the SX line is no exception. This particular wheel uses a cast aluminum construction, which keeps the weight down while maintaining solid structural integrity. The Gloss Platinum finish with the Diamond Cut Face gives it a sharp, modern look that can really change the appearance of your vehicle. The 5x108 bolt pattern and ET38 offset are specific fitments, so it's important to confirm these match your vehicle's requirements for proper mounting and clearance. The -82mm center bore means you'll likely need a hub-centric ring or a specific BBS hub system to ensure it sits perfectly centered on your axle, and the PFS/clip requirement points to a specific mounting system for the center cap.

When installing wheels like these, it's always a good idea to check for any potential clearance issues with your brake calipers, suspension components, and fender liners, especially with a 20-inch diameter. You'll also want to ensure you have the correct lug nuts or bolts that match the wheel's bolt pattern and your vehicle's stud size. Because this is a single wheel purchase, make sure you're aware of how many you need and if you're replacing a damaged wheel or upgrading your entire set.