BMR 64-67 A-Body Non-Adj. Rear Suspension Kit - Red

When you're looking to get more out of your classic 1964-1967 GM A-body, this Rear Suspension Kit from BMR Suspension is a solid option. This kit includes the lower control arms, upper control arms, and control arm reinforcement braces, all finished in a vibrant red. It's designed to help your car launch harder, reduce wheel hop, and add consistency when you're cornering, making it suitable for street performance, drag racing, and handling applications.

The stock stamped steel control arms with their soft rubber bushings can deflect under load, absorbing power instead of sending it to the tires. BMR addresses this by using heavy-duty DOM steel tubing for their components. The lower control arms are built from 1.50-inch diameter, 0.120-inch wall tubing, while the upper control arms use 1.625-inch diameter, 0.120-inch wall tubing, both offering plenty of strength. The reinforcement braces, made from 1.0-inch diameter, 0.156-inch wall steel tubing, help reduce frame flex. Inside the control arms, you'll find greasable, 95-durometer polyurethane bushings. These are internally fluted to hold grease effectively, ensuring quiet operation and consistent lubrication on the thrust surface, which is a notable improvement over stock rubber bushings.

Beyond the control arms themselves, the reinforcement braces are a key part of this kit. They tie the upper and lower control arm frame mounts together, significantly strengthening the upper mount area and helping to reduce overall frame deflection. This comprehensive approach means you're getting a well-built system designed to handle the demands of performance driving.