Brembo 97-04 986 Boxster S Rear GTR BBK 4 Piston Billet345x28 2pc Rotor Drilled- Nickel Plated

The 345x28mm, two-piece rotor design in this Brembo GTR Big Brake Kit is a key feature for serious performance. These rotors are drilled and nickel-plated, which helps manage heat and resist corrosion, especially important for a rear brake setup on a performance vehicle like the 986 Boxster S. This kit is built around a robust 4-piston caliper, designed to provide a significant increase in clamping force over the stock setup.

When you're pushing your Boxster S hard, especially on track or during spirited driving, the demands on your braking system are intense. This Brembo kit addresses those demands with its well-built components. The billet construction of the rotor hats and the caliper bodies are chosen for their strength and light weight, helping to reduce unsprung mass. The drilled rotor surface helps to vent gases and heat away from the pad surface, maintaining consistent braking performance even under heavy use. The nickel plating on the rotors not only looks sharp but also provides a layer of protection against rust and corrosion, which is a common concern for brake components.

This is a comprehensive rear brake upgrade. While the kit includes the primary components for the rear axle, always refer to the manufacturer's installation instructions for any specific hardware or additional items that may be recommended for a complete and safe installation on your 97-04 Boxster S.