Camburg 07-21 Toyota Tundra / 03-24 Toyota 4Runner UCA Replacement OE X-Joint (Pair)

If you're upgrading the upper control arms on your Toyota Tundra, 4Runner, FJ Cruiser, or Lexus GX, these Camburg X-Joints are a solid choice for replacing the ball joint. They're designed to handle higher angles than stock, which is crucial when you're running aftermarket upper control arms that allow for more wheel travel. This means you can push your vehicle harder off-road or on rough terrain without worrying about the joint binding up.

Camburg built these X-Joints with strength and durability in mind. They use heat-treated materials for improved strength and feature a fully sealed design with a dual-lip boot to keep grease in and contaminants like dirt, sand, and water out. This makes them well-suited for all-weather conditions and extreme environments. Plus, the grease zerk fitting means you can easily service them on the truck without removing the boot, helping to extend their lifespan. These are specifically made to fit Camburg's BJ performance upper control arms (like part numbers CAM-310079 and CAM-310083) and are not compatible with uniball arms or stock sheet metal arms.

For best results, Camburg recommends greasing these X-Joints 2-3 times per year, or every 5,000-8,000 miles, using a high-temperature lithium complex #2 synthetic grease. More frequent greasing might be needed if you frequently use your vehicle off-road or in wet, muddy, or snowy conditions.