Style Guard Chevy Truck Black & Chrome Side Molding (2�" x 24ft)

The Style Guard Chevy Truck Side Molding By Cowles Products is the best way to add styling and protection to your Chevy truck. Easy to apply with durable and long lasting professional grade 3M adhesive backing. You can apply the moldings all by yourself with four very simple and easy steps. The Style Guard Side Molding can be applied to any Chevy model truck by cutting and trimming the molding to a specific length of your vehicle. Give your Chevy truck that stylish look you've been searching for with the Style Guard Chevy Truck Side Molding.

 

 

Features:

• Add Style and Protection

• Easy To Apply

• Professional Grade 3M Adhesive

• Tested Tough

• Molding Size: 2�" x 24'

Easy To Apply In 4 Simple Steps:

STEP 1: Wash Surface	STEP 2: Measure	STEP 3: Cut Molding To Fit	STEP 4: Press Into Place

 

STEP 1: Clean the surface area very well to remove all road film, wax or other material
that may prevent a film bond. Allow to dry before applying.

STEP 2: With a tape measure and masking tape, lay down a strait line of making tape
the entire length of the vehicle. The bottom edge of the tape should be where you want
the upper edge of the molding.

STEP 3: You will want a 1/8" gap at each door edge. Starting at the front of your vehicle,
measure the section of molding you will need to reach that gap. Use pruning shears or
a sharp knife to bevel-cut the molding at a 45 degree angle.

STEP 4: Press the molding along the bottom edge of your tape line.
Refer to step 3 and 4 as you do each section. Do not wash vehicle for 24 hours.