COMP Cams Cam & Lifter Kit FW XR292 R10

When you're building a Pro Street Ford 351W and looking for serious performance, this COMP Cams Xtreme Energy XR292 R10 Solid Roller Cam and Lifter Kit is what you need. This kit gives you the core components to significantly change your engine's breathing characteristics. It's designed for engines that demand more airflow and higher RPMs, making it a popular choice for those rebuilding their top end for aggressive street use or track days.

Inside this kit, you'll find the camshaft itself, a set of solid roller lifters designed to work with it, assembly lube to get everything started right, and decals for that finishing touch. To get the most out of this cam, COMP Cams recommends it for engines with an aftermarket intake and exhaust system, a compression ratio of 11:1 or higher, and a torque converter with at least a 3500 RPM stall speed. This setup ensures your engine can take full advantage of the cam's aggressive profile, which has intake and exhaust duration figures of 254 and 260 degrees respectively at .050 inch lift. The .624 inch intake and .624 inch exhaust lift figures mean you'll need strong valve springs and potentially upgraded valve train components to handle the increased stress.

This kit is intended for a range of Ford vehicles, including popular models like the Bronco, F-150, and E-Series vans from the 1970s through the 1990s, all using the 351 Windsor engine. Keep in mind that this kit is not CARB approved and cannot be shipped to California. For the best results, always refer to the included instructions for proper installation and break-in procedures.