What type of lifters does this camshaft use?

This COMP Cams camshaft is designed for hydraulic flat tappet lifters. If your engine block from 1987 or newer has factory roller provisions, you will need to ensure you have the correct lifters and potentially an installation kit.

Can this camshaft be used with my stock TPI engine?

Yes, this camshaft is a good option for stock TPI 350 or TPI 305 engines. For best results, it's recommended to use it with a modified computer or programmer to optimize performance.

What is the break-in procedure for this camshaft?

Proper camshaft break-in is critical for longevity. Always refer to the manufacturer's installation instructions for the specific break-in procedure, which typically involves running the engine at a specific RPM for a set period immediately after installation.

COMP Cams Camshaft CS 260AH-14 12-402-4

Name: COMP Cams Camshaft CS 260AH-14
Brand: COMP Cams
Price: 320.45 USD
Availability: InStock

COMP Cams Camshaft CS 260AH-14

$320.45

On Backorder

Order now to reserve yours — we'll ship as soon as stock arrives. Full refund if we're unable to fulfill.

COMP Cams CS 260AH-14 camshaft for Chevy Small Blocks. Good for TPI 350/305 with computer mods.

Key Features

Fits 1958-2002 Chevrolet Small Block engines (262-400 c.i.d.).
Features 212 degrees intake and 218 degrees exhaust duration at .050 lift.
Designed for hydraulic flat tappet lifters.
Suitable for computer-controlled or blower/turbo applications.
Works well with stock TPI 350 or TPI 305 engines when using a modified computer or programmer.
Excludes LT1/LT4, LS-based engines, and factory roller blocks from 1985 and newer.

⚠️ CA WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Learn more

Secure CheckoutFast Shipping631-982-0042

Will this fit your vehicle?

Product Details

This COMP Cams CS 260AH-14 camshaft features a 212-degree intake and 218-degree exhaust duration at .050 lift, making it a solid choice for computer-controlled or modified engines. It's designed for hydraulic flat tappet lifters and works well with stock TPI 350 or TPI 305 engines, especially when paired with a modified computer or programmer. This camshaft is intended for Chevrolet Small Block engines from 1958 through 2002, excluding factory roller blocks from 1985 and newer, as well as LT1/LT4 and LS-based engines.

The CS 260AH-14 is built with a focus on reliable performance for a wide range of applications. Its specific duration and lift profile are chosen to provide an improved idle quality while still offering a noticeable bump in power over stock cams. COMP Cams is a well-known name in performance engine components, and this camshaft reflects their experience in creating parts that fit right and perform as expected for enthusiasts looking to get more out of their classic Chevy V8s.

When installing this camshaft, remember to check your engine block for factory roller provisions, as this cam is designed for flat tappet lifters. If your block is from 1987 or newer and has roller provisions, you may need to purchase a COMP Hydraulic Roller Lifter Install Kit. Always refer to the manufacturer's installation instructions for specific details regarding break-in procedures and any other necessary components.