What is the primary benefit of this camshaft for a supercharged or turbocharged engine?

This camshaft is specifically designed for blower performance. Its intake and exhaust durations are tuned to work effectively with increased boost levels, helping to improve airflow and power output when forced induction is applied.

Do I need to replace my valve springs when installing this camshaft?

Yes, you must replace your valve springs when installing this camshaft. The manufacturer states that valve springs must be replaced, as the cam's updated lift profile and intended operating range require stronger springs to function correctly and prevent valve float.

What other modifications are recommended when installing this camshaft?

The manufacturer recommends a pulley change for increased boost when using this camshaft. This helps to maximize the performance gains from the camshaft by providing more air to the engine.

COMP Cams Camshaft 76-802-9 for GM 3800 V6

Name: COMP Cams Camshaft Gm38 264HR15
Brand: COMP Cams
Price: 604.45 USD
Availability: InStock

COMP Cams Camshaft Gm38 264HR15

$604.45

On Backorder

Order now to reserve yours — we'll ship as soon as stock arrives. Full refund if we're unable to fulfill.

COMP Cams Xtreme Energy hydraulic roller camshaft for GM 3800 V6 engines. Designed for blower performance with increased boost.

Key Features

Fits 1996-2009 Buick, Chevrolet, Oldsmobile, and Pontiac vehicles with the GM 3800 V6 engine.
Features a 210 intake duration and 220 exhaust duration at .050 inch lift.
Hydraulic roller design for reduced friction and improved performance.
Optimized for blower performance and works best with increased boost levels.
Requires replacement of stock valve springs due to updated lift profile.
COMP Cams part number 76-802-9.

⚠️ CA WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Learn more

Secure CheckoutFast Shipping631-982-0042

Will this fit your vehicle?

Product Details

This COMP Cams Xtreme Energy camshaft features a 210 intake and 220 exhaust duration at .050 inch lift, making it a solid choice for GM 3800 V6 engines, especially when you're looking to add forced induction. The hydraulic roller design means less friction and more consistent valve lift compared to flat tappet cams, which is crucial for performance applications. This cam is specifically tuned for blower performance, meaning it works best when you're increasing boost, often paired with a pulley change to maximize its potential.

When installing this camshaft, it's important to note that you will need to replace your valve springs. This is because the updated lift profile and intended operating range of this performance cam require stronger springs to prevent valve float at higher RPMs. The 76-802-9 camshaft is designed to fit a wide range of GM 3800 V6 vehicles, including popular models like the Pontiac Grand Prix, Buick LeSabre, and Chevrolet Impala, allowing many owners to tap into improved performance.

For those building a forced induction setup on their GM 3800, this camshaft is a key component to unlock more power. Remember to consult the manufacturer's installation instructions for specific details regarding valve spring requirements and any other necessary modifications to ensure optimal performance and longevity of your engine.