COMP Cams Camshaft Kit CB 282S

Starting with a 236 degrees of duration at 0.050 inch lift on both the intake and exhaust, this COMP Cams CB 282S camshaft kit is built for street machines that demand a noticeable performance increase. This solid flat tappet camshaft is designed to work with Chevrolet Big Block engines originally equipped with flat tappet camshafts, fitting a wide range of vehicles from the 1960s and 70s, including popular models like the Chevrolet Impala, Chevelle, and Camaro.

This isn't just a camshaft; it's a complete K-Kit, meaning you get everything you need to get the job done right. Inside the box, you'll find the camshaft itself, a set of lifters, valve springs, retainers, valve locks, and valve stem seals. It also includes a timing chain set for proper engine timing, assembly lube specifically for flat tappet applications, and even decals and instructions to guide you through the installation. To get the most out of this camshaft, COMP Cams recommends using a stall converter of 2500 RPM or higher, headers, a compression ratio of 9:1 or more, and lower rear-end gears. Expect a rough idle, which is characteristic of this type of performance camshaft.

When installing this kit, remember that it's intended for vehicles originally equipped with flat tappet camshafts. Ensure your engine's existing setup matches this requirement. Because this is a performance part, it's not CARB approved and cannot be shipped to California. Always refer to the manufacturer's instructions for the most accurate installation details and recommended supporting modifications for your specific application.