Specifications
- Brand
- COMP Cams
- Part #
- 26953-16
COMP Cams Dual Spring w/ Damper 1.560 OD 1.950 IH .760 Lift Set
$312.72
Order now to reserve yours — we'll ship as soon as stock arrives. Full refund if we're unable to fulfill.
COMP Cams Dual Spring w/ Damper 1.560 OD 1.950 IH .760 Lift Set. Ideal for aggressive roller cams needing improved valve control at higher RPM.
Key Features
- Dual valve springs with damper designed for aggressive roller and solid flat tappet cams.
- Suitable for applications with an installed height near 1.950 inches.
- Fits cylinder heads requiring a spring pocket of at least 1.550 inches.
- Features a spring rate of 500 lbs/in and an open load of over 575 pounds.
- Designed to support camshaft lift up to .750 inches.
- Built with technology derived from NASCAR competition for reliability.
⚠️ CA WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Learn more
Product Details
If you're building a performance engine with a solid flat tappet or aggressive roller camshaft, you need valve springs that can keep up. These COMP Cams dual springs are designed to handle the demands of high-RPM operation and aggressive cam profiles, drawing on technology honed in NASCAR competition. They're built to ensure your valves close reliably, even when the engine is pushed hard.
These springs have a 1.560-inch outer diameter and are intended for an installed height of 1.950 inches, fitting cylinder heads with at least a 1.550-inch spring pocket. With a spring rate of 500 lbs/in and an open load exceeding 575 pounds, they offer solid control for cams up to .750-inch lift. This well-built set is geared towards race applications where consistency and durability are critical for endurance runs.
When installing these, pay close attention to the specified installed height to ensure you achieve the correct spring pressures for optimal performance and valve control. This set is a strong option for anyone looking to enhance their engine's valve train reliability under demanding conditions.
Specifications
- Brand
- COMP Cams
- Manufacturer Part #
- 26953-16
Frequently Asked Questions
You Might Also Like
Similar products from the same category
COMP Cams Dual Spring w/ Damper 1.560 OD 1.950 IH .760 Lift Set