What is the maximum lift these springs can handle?

These COMP Cams dual valve springs are designed for hydraulic roller cams up to .750” lift. For flat tappet cams, they are suitable for lifts up to .600”.

What is the required spring pocket diameter for installation?

You will need a cylinder head with a spring pocket diameter of at least 1.520 inches to properly install these springs.

What is the installed height for these valve springs?

The specified installed height for these COMP Cams dual valve springs is 1.900 inches.

COMP Cams Dual Valve Springs 26924-16

Name: COMP Cams Dual Springs w/ Damper 1.519 OD 1.900 IH .800 Lift
Brand: COMP Cams
SKU: comp-cams-comp-cams-dual-springs-w-damper-1-519-od-1-900-ih-800-lift-t14-801871
Price: 204.20 USD
Availability: BackOrder

COMP Cams Dual Springs w/ Damper 1.519 OD 1.900 IH .800 Lift

$204.20

On Backorder

Order now to reserve yours — we'll ship as soon as stock arrives. Full refund if we're unable to fulfill.

COMP Cams Dual Springs w/ Damper 1.519 OD 1.900 IH .800 Lift. These valve springs offer solid control for heavy valve trains.

Key Features

These valve springs fit cylinder heads with at least a 1.520" spring pocket.
Designed for an installed height of 1.900 inches.
Features a 1.519 inch outer diameter.
Built with premium wire and includes a damper for improved valve control.
Rated for hydraulic roller cams up to .750” lift or flat tappet cams up to .600” lift.
Offers an open load of over 420 pounds and a spring rate of 375 lbs/in.

⚠️ CA WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Learn more

Secure CheckoutFast Shipping631-982-0042

Product Details

These COMP Cams dual valve springs feature a 1.519 inch outer diameter and are designed for an installed height of 1.900 inches. They are built with premium wire and a damper to help control valve float, especially in applications with heavier valve trains. This makes them a solid option for engines running hydraulic roller cams up to .750” lift, or even flat tappet cams up to .600” lift.

With an open load of over 420 pounds and a spring rate of 375 lbs/in, these springs provide the necessary force to keep your valves in check during high-RPM operation. They are designed to fit cylinder heads that have a spring pocket of at least 1.520 inches, offering a good fit for many popular performance heads. You can expect improved valve control and reliability, whether you're building a street performance engine or a dedicated race motor.

When installing these springs, ensure your cylinder heads can accommodate the 1.520 inch spring pocket diameter. Refer to the manufacturer's installation instructions for specific details regarding proper setup and any required hardware.