COMP Cams Pushrod 7.750in Straight 7/16

COMP Cams is well-known for making serious valvetrain components, and these pushrods are a prime example of that focus. If you're building or rebuilding an engine, especially one that's going to see a lot of stress, you need parts that can handle the load. This 7.750-inch long, 7/16-inch diameter pushrod is designed for exactly that kind of demanding application.

What sets these apart is the robust construction. They're made from a single piece of heat-treated chromemoly tubing right here in the USA, which is a lot stronger than the typical steel used in many stock or basic aftermarket pushrods. This material, combined with a consistent .165-inch wall thickness – even in the tapered ends – means these pushrods are stiffer and can handle the significant impact loads, up to 7500 lbs, that can occur in high-performance engines. The 7/16-inch diameter offers improved stiffness and a higher natural frequency, which is a real advantage when you have plenty of intake port and lifter clearance. Plus, the 5/16-inch ball ends have a radius that gives extra clearance for your rocker arm adjuster, making setup a bit easier, and they can be installed either way.

These pushrods incorporate technology originally developed for NASCAR and NHRA racing, so you know they're built to perform under pressure. If your engine build calls for a stronger, stiffer pushrod to handle aggressive camshafts and high spring pressures, this is a solid option to consider.