COMP Cams Pushrod 7.850in Straight 7/16

These COMP Cams pushrods start with a substantial .165-inch wall thickness, which is notably thicker and stiffer than the common .080 or .125-inch walls you'll find on many stock or basic replacement pushrods. This consistent wall thickness, even in the tapered ends, contributes to a stronger, more rigid component that can better handle the high impact loads experienced in extreme valve train setups, sometimes reaching up to 7500 lbs in racing applications. The 7/16-inch diameter also adds to this stiffness and raises the natural frequency of the pushrod, which is a significant advantage when you have ample clearance in your intake ports and lifter bores.

Crafted from one-piece, heat-treated chromemoly tubing made right here in the USA, these pushrods are built to be stronger than typical 1000 Series steels. The ends feature a 5/16-inch ball with a radius, which is designed to provide extra clearance for your rocker arm adjuster, especially at high lift. This radius also means the pushrods can be installed either way, up or down, simplifying the assembly process. This technology was originally developed for demanding NASCAR and NHRA race engines, so you know they're built for serious performance.