COMP Cams Pushrod 9.400in Straight 7/16

If you're rebuilding the top end of your engine and need a robust pushrod set, these 9.400-inch long, 7/16-inch diameter pushrods from COMP Cams are a solid option. They are constructed from one-piece, heat-treated chromemoly tubing, which is notably stronger than standard 1000 Series steels and designed to handle the demands of extreme valve train setups. This makes them a good choice for applications that see significant stress, like those found in racing environments.

The design here is pretty smart, drawing from technology originally developed for NASCAR and NHRA race engines where pushrods can experience impact loads up to 7500 lbs. The 7/16-inch diameter offers improved stiffness and a higher natural frequency, which is a real advantage when you have ample intake port and lifter clearance. You'll also find 5/16-inch ball ends with a 210-degree radius on each end. This radius helps provide extra clearance for the rocker adjuster at high lift, and it means you can install the pushrods either way up. The consistent .165-inch wall thickness, even in the tapered ends, is significantly thicker and stronger than common .080-inch or .125-inch wall designs, contributing to overall valve train stability.

These pushrods are made in the USA, ensuring a well-built component for your engine. They are designed to fit right and provide reliable performance under demanding conditions.