COMP Cams Pushrod7.500in Dual Taper 3/8

When you're rebuilding the top end of your engine, getting the valve train geometry just right is key. These Dual Taper pushrods from COMP Cams are designed to help you achieve that. They're 7.500 inches long and feature a unique dual taper design where the middle of the pushrod is larger in diameter than the ends. This gives you the benefits of a beefier 7/16-inch pushrod for stiffness, but with the clearance you'd normally get from a 3/8-inch pushrod, which can be helpful for intake port clearance or clearing offset roller lifters.

What really sets these apart is their construction. They're made in the USA from a single piece of heat-treated 4130 chromemoly steel tubing. This material is known for being strong and durable. The .165-inch wall thickness is notably stiffer and stronger than older .125-inch wall designs, which translates to more accurate valve motion and better durability over time. The 5/16-inch ball ends are also designed with a specific radius to ensure proper clearance with your rocker arm adjuster, especially at peak lift.