COMP Cams Pushrod9.400in Dual Taper 3/8

If you're rebuilding the top end of your engine, getting the valve train geometry just right is key for performance and longevity. These 9.400-inch dual taper pushrods from COMP Cams are designed to help you achieve that precise setup, especially when you need a bit more clearance around the rocker arm adjuster at peak lift.

What makes these stand out is their dual taper design. The middle section is larger in diameter than the ends, giving you the benefits of a beefier 7/16-inch pushrod for stiffness and accuracy, but with the clearance you'd typically get from a 3/8-inch pushrod. This is particularly helpful for clearing offset roller lifters and can even help with intake port flow. They're constructed from a single piece of heat-treated 4130 chromemoly steel tubing with a solid .165-inch wall thickness, which is notably stiffer and stronger than older .125-inch wall designs, leading to more accurate valve motion and better durability over time. Plus, they're made right here in the USA.

These pushrods feature 5/16-inch ball ends with a 210-degree radius, ensuring good contact with your rocker arms and lifters. If you're looking for a well-built pushrod that offers improved accuracy and clearance for your engine build, these are a solid option.