COMP Cams Pushrods Hi-Tech 3/8in 8.450in

If you're rebuilding the top end of your engine, these COMP Cams Hi-Tech pushrods are a solid choice. They measure 8.450 inches long with a 3/8 inch diameter and a .135 inch wall thickness, designed to handle the demands of performance camshafts and valve springs.

These pushrods are made from a single piece of seamless chromemoly steel, which is then black oxide coated and heat-treated for added strength and durability. COMP Cams states they are 37% stiffer than their standard .080 inch wall pushrods, meaning they'll resist flexing under load, helping to ensure consistent valve train geometry. The tips have a 210-degree radius on both ends, which helps them seat properly in the rocker arms and lifters.

Because these are one-piece pushrods, they offer a strong, reliable connection without the potential failure points of multi-piece designs. They retain the same oil hole diameter as standard wall pushrods, so you don't have to worry about reduced oil flow to your valve train.