COMP Cams Pushrods8.900in Dual Taper 3/8

If you're rebuilding the top end of your engine and need precise valve control, these Dual Taper pushrods from COMP Cams are a solid option. They're 8.900 inches long and feature a unique dual taper design where the middle of the pushrod is larger in diameter than the ends. This gives you the benefits of a beefier 7/16-inch pushrod for stiffness, while still offering the clearance of a 3/8-inch pushrod at both ends.

This design is particularly helpful for providing extra clearance around the rocker arm adjuster at peak lift, and the taper helps clear the top of most offset roller lifters. COMP Cams builds these from a single piece of heat-treated 4130 chromemoly steel tubing right here in the USA. The .165-inch wall thickness is notably stiffer and stronger than previous .125-inch wall offerings, which translates to more accurate valve motion and better durability over time. You get a full set of 16 pushrods, all with 5/16-inch ball ends that have a 210-degree radius for good contact.