Specifications
- Brand
- COMP Cams
- Part #
- 26942-16
- UPC
- 00036584428497
COMP Cams Single Spring w/ Damper - 1.440in OD 1.750IH
$114.12
Order now to reserve yours — we'll ship as soon as stock arrives. Full refund if we're unable to fulfill.
COMP Cams Single Spring w/ Damper - 1.440in OD 1.750IH. Reliable valve springs for hydraulic roller and flat tappet cams.
Key Features
- This is a set of 16 single valve springs with dampers.
- They have a 1.440-inch outer diameter and fit a 1.750-inch installed height.
- Designed for hydraulic flat tappet and street hydraulic roller cams up to .600-inch lift.
- Features a 350 lbs/in spring rate and over 330 pounds of open load.
- Includes a damper to help control valve float and spring surge.
⚠️ CA WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Learn more
Product Details
If you're rebuilding the top end of an engine and need dependable valve springs for your hydraulic flat tappet or street hydraulic roller camshaft, these COMP Cams springs are a solid option. They're designed to work with cams up to .600 inches of lift and have an installed height of 1.750 inches, fitting common spring pockets with a 1.440-inch outer diameter.
These springs are well-built using premium wire and feature a damper to help control valve float. With an open load of over 330 pounds and a rate of 350 pounds per inch, they offer good control for many street performance applications, and can even handle some solid flat tappet cams. The damper helps reduce spring surge, which is important for consistent valve control, especially at higher RPMs.
This set includes 16 springs, enough for a typical V8 engine. Make sure to check your specific camshaft's requirements to ensure these springs meet your needs for lift and seat pressure.
Specifications
- Brand
- COMP Cams
- Manufacturer Part #
- 26942-16
- UPC
- 00036584428497
Frequently Asked Questions
You Might Also Like
Similar products from the same category
COMP Cams Single Spring w/ Damper - 1.440in OD 1.750IH