What does a brake wheel cylinder do?

The brake wheel cylinder is part of your drum brake system. When you apply the brakes, hydraulic pressure pushes pistons inside the cylinder outward. These pistons then push the brake shoes against the drum, creating friction to slow your vehicle.

Why is it important to replace both front wheel cylinders?

It's often recommended to replace both front wheel cylinders at the same time. If one is failing, the other may be close to failing as well, and replacing them together ensures balanced braking performance.

What else might I need when replacing a wheel cylinder?

You will likely need new brake fluid to refill the system after bleeding the brakes. It's also a good time to inspect your brake drums and shoes for wear and replace them if necessary. Always refer to your vehicle's service manual for specific installation instructions.

DFC 70-73 Chrysler Town & Country Front-R/Front-L Brake Wheel Cylinder

Specifications

Brand: DFC
Part #: 375-39006
UPC: 190920396403

DFC 70-73 Chrysler Town & Country Front-R/Front-L Brake Wheel Cylinder

Name: DFC 70-73 Chrysler Town & Country Front-R/Front-L Brake Wheel Cylinder
Brand: DFC
Price: 20.84 USD
Availability: InStock

$20.84

On Backorder

Order now to reserve yours — we'll ship as soon as stock arrives. Full refund if we're unable to fulfill.

DFC brake wheel cylinder for 1970-1973 Chrysler, Dodge, and Plymouth vehicles. Ensures proper brake pressure for reliable stopping.

Key Features

Fits 1970-1973 Chrysler, Dodge, and Plymouth vehicles.
Replaces the front right or front left brake wheel cylinder.
Ensures proper hydraulic pressure for drum brake operation.
Helps apply consistent force to brake shoes for reliable stopping.
Direct fit replacement part.

⚠️ CA WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Learn more

Secure CheckoutFast Shipping631-982-0042

Will this fit your vehicle?

Product Details

This is a DFC brake wheel cylinder, designed to fit the front right or front left side of a wide range of classic Chrysler, Dodge, and Plymouth vehicles from the early 1970s. If you're working on the drum brakes of a 1970-1971 Chrysler Newport, New Yorker, 300, or Town & Country, or a 1970-1972 Dodge Challenger or Plymouth Duster, this part is crucial for restoring your braking system.

The wheel cylinder is a key component in drum brake systems. When you press the brake pedal, hydraulic pressure from the master cylinder pushes pistons inside this wheel cylinder outward. These pistons then force the brake shoes against the inside of the brake drum, creating the friction needed to slow or stop your vehicle. A well-functioning wheel cylinder ensures consistent and even pressure is applied to both brake shoes, which is vital for safe and effective braking. This DFC unit is a well-built replacement designed to meet the original specifications for your vehicle.

When replacing wheel cylinders, it's a good idea to inspect the brake drums and shoes for wear. Often, if one wheel cylinder needs replacement, the others may not be far behind. Make sure to refer to your vehicle's service manual for the correct installation procedure and any specific hardware or brake fluid requirements.