Eagle Chevy LT1350 1Pc 3.480in Crank 6.000in I-Beam Rods -5cc 4.060in Pistons Rotating Assembly

This Eagle Street & Strip rotating assembly gives you the core components to rebuild or upgrade your Chevy LT1 or 350 engine. Inside this package, you'll find a 3.480-inch cast crankshaft, a set of 6.000-inch I-beam connecting rods equipped with 3/8-inch ARP 8740 bolts, and forged 4032 Mahle flat-top pistons with a -5cc dish, designed for a 4.060-inch bore. It also includes plasma-moly standard gap piston rings and King rod and main bearings to complete the assembly.

This assembly is specifically put together for pump gas, naturally aspirated street applications. The Mahle pistons are forged from 4032 aluminum, which offers good thermal expansion properties for street driving, and the -5cc dish helps achieve a reasonable compression ratio with typical cylinder heads. The inclusion of ARP 8740 bolts for the connecting rods means you're getting strong, reliable fasteners that are a significant step up from stock. Eagle is known for putting together well-built rotating assemblies that offer a solid foundation for many engine builds.

When planning your engine build, remember that this assembly is intended for street use and is not CARB approved, so it cannot be shipped to California. You'll want to ensure you have all the necessary supporting components for your engine rebuild, such as gaskets, seals, oil pump, and timing set, to complete the installation.