Eagle Ford 302 3.000in Crank 5.400in H-Beam 6cc Dome 4.040in Pistons Rotating Assembly

If you're rebuilding a Ford 302 engine for serious performance, a strong rotating assembly is the heart of the build. This Eagle rotating assembly is designed to handle the demands of a high-horsepower application, giving you a solid foundation for your project. It includes a 3.000-inch stroke crankshaft, 5.400-inch H-beam connecting rods, and 4.040-inch bore pistons with a 6cc dome volume, which is a common setup for naturally aspirated or forced induction builds aiming for increased compression.

Eagle is known for well-built engine components, and this assembly is no exception. The H-beam connecting rods are a popular choice for their strength and durability, offering a good balance for performance builds that see regular use. The crankshaft is forged for added toughness, ready to withstand the stresses of higher RPMs and increased cylinder pressures. The included pistons are designed to work with this specific combination, helping you achieve your desired compression ratio. This kit is a comprehensive solution, meaning you get the core components needed to build a robust short block.

When assembling an engine of this caliber, attention to detail is key. Ensure all components are clean, properly lubricated, and torqued to specification according to your engine build manual. This assembly is not CARB approved and cannot be shipped to California. For any questions regarding specific build requirements or compatibility with other engine components, please consult your engine builder or refer to Eagle's technical documentation.